Installation Guide

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
FB,M12x1.75,35,CL10.9,YZ
10-10516
4
1
WASHER,S-CON,1/2,YZ
30-00149
4
2
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 877-287-8634
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3500 350
31
10
9/17/2020
12094
25
36296 / 247282 / RRH12094
INCLUDING SPORT MODELS
1996-07 CHRYSLER TOWN & COUNTRY, DODGE CARAVAN, PLYMOUTH VOYAGER
-NO DRILLING REQUIRED
1) Raise vehicle for access to underside.
2) Remove two rearmost bolts from vehicle frame. (2 each per side)
3) Raise hitch into position
4) Secure by installing the bolts removed in step 2
5) Torque fasteners to 79 lb.-ft.
EXISTING WELDNUT
FRAME RAIL
1
2
DESIGNED FOR USE WITH
BALL MOUNT # D-21 / 45521