Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
BOLT,CAR,5/8-11 UNC,2,GRD8,YZ10-1034421
HHCS,1/2-13 UNC,6,GRD8,YZ
10-1049922
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006223
NUT,SER-FLANGE,5/8-11 UNC,GRD8,YZ
20-0010524
WASHER,FLAT,1/2,YZ
30-0013325
.250 x 1.50 x 2.00" ROUND HOLE SPACERCM-SP1626
5/8" FISHWIRE5_8 FISHWIRE2
7
.706 OD x .042 TUBE SPACER31068-TS28
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
2
6
8
1
4
3
7
5
1. Remove the lower air dam on 2011 and newer trucks by
removing (2) nuts with a 15MM socket. Trim the lower
plastic bumper fascia as required using the diagram
below as a reference only.
2. Tape the (2) 1/2" washers securely to the forward most
attachment point. Insert 1/2" x 6" hex bolts into the
CM-SP16 and 31068-TS and install from the inboard
side of the frame through the 1" hole, passing out of the
1/2" washer.