Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Press the 6" long bolts into the frame to allow the hitch
to slide up into position. Raise hitch, press bolts back
out, and loosely install the 1/2" hex flange nuts.
4. Fishwire the 5/8" carriage bolts from the end of the
frame into the rearward mounting slots in the frame.
Loosely install the remaining 5/8" hex flange nuts.
5. Torque all 1/2" fasteners to 110 lb-ft and all 5/8"
fasteners to 180 lb-ft.