Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ
10-1027261
.250 x 1.00 x 2.50" SQUARE HOLE SPACERCM-SP1062
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ
20-0006263
1/2" FISHWIRE1_2 FISHWIRE
64
1. Use 18mm socket and ratchet to remove driver and
passenger side fascia brackets and return to owner.
If present the existing bolt plates will fall out in front of frame
rails. Temporarily move electrical harness off of frame rail.
NOTE:
If oil cooler lines are present remove by unclipping
attachment from frame rail.
2. Fishwire (2) bolt plates removed in STEP 1 through original
holes on inside of frame rails.
NOTE:
If bolt plates are not present, use additionally supplied
fasteners and fishwire1/2-13 x 1 3/4" bolts and CM-SP10
spacers through holes on inside of frame rails.
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
3
2
1
EXISTING BOLT PLATE
(BOTH SIDES)
USE SUPPLIED CARRIAGE BOLTS,
SPACERS AND NUTS IF BOLT
PLATES ARE NOT PRESENT
COOLER LINE
MOUNTING HOLE
(BOTH SIDES)
WIRE HARNESS
MOUNTING HOLE
(BOTH SIDES)