Installation Guide

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
4. Raise side plates into position and loosely secure (4) hex
flange nuts onto existing bolt plates or 1/2-13 x 1 3/4" bolts.
Fishwire supplied (2) 1/2-13 x 1
3/4" carriage bolts and
CM-SP10 spacers through front of driver and passenger side
frame rails and out slot on bottom of frame rail. Loosely
secure 1/2-13 hex flange nuts onto carriage bolts.
3. Locate center of vehicle and mark trim area with masking
tape. Cut marked trim area on fascia with rotary tool
NOTE: Dimensions are approximate and may be modified
for an ideal fit.
5. Secure all hardware and torque all 1/2" hardware to
110 ft-lbs and all M12-1.75 to 86 ft-lbs. Reconnect
electrical harness through hole in driver side plate.
NOTE:
If oil cooler lines are present attach to provided hole
on side plate.
3.5"
4"