Installation Guide

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A STRAIGHT LINE PULL: 9,000 LBS. MAX. LINE PULL.
*** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY. ***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
HITCH WEIGHT: LBS.
INSTALL TIME: MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
5000 500
37
20
08/07/2020
33055
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ10-1027241
NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006242
.250 x 1.00 x 3.00" SQUARE HOLE SPACERCM-SP643
1/2" FISHWIRE1_2 FISHWIRE2
4
-DRILLING REQUIRED
-FISHWIRE HARDWARE
1. If present, remove all plastic rivets on the front valance on the vehicle. (Return to customer)
2. Enlarge the existing front hole to 17/32".
3. Fishwire a 1/2" carriage bolt and CM-SP6 spacer into each hole as shown. (See Fishwire Technique)
4. Raise the hitch into position over the 1/2" carriage bolts and secure using the (4) 1/2" flange nuts.
5. Torque all 1/2" hardware to 110 ft-lbs.
DRIVER SIDE
FRAME RAIL
PASSENGER SIDE
FRAME RAIL
4
2
1
3
1991-2007 FORD ECONOLINE VAN E-150/250/350
(INCLUDING RV CUTAWAY)
TOOLS REQUIRED
1/2"FISHWIRE
RATCHET
1/2" SOCKET
TORQUE WRENCH
DRILL
17/32" DRILL BIT
BUMPER
FINAL INSTALL VIEW
ENLARGED HOLE
(BOTH SIDES)