Installation Guide
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
1-877-287-8634
INSTALLATION STEPS
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
BALL MOUNT TONGUE SLEEVE
8/29/13
45007
1. Slide the ball mount tongue sleeve over the ball mount tongue.
2. Insert trailer ball through the tongue sleeve and ball mount, align the flat on the trailer ball with the flat on
the tonge sleeve.
3. Torque trailer ball to spec using lock washer and nut.
TRAILER BALL & FASTENERS
(SOLD SEPARATELY)
BALL MOUNT
(SOLD SEPARATELY)
BALL MOUNT
TONGUE SLEEVE