Installation Guide

Table Of Contents
INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com
Parts List
DESCRIPTIONPART NUMBERQTYITEM
BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ10-1027261
HHCS,M8x1.25,45,CL10.9,YZ
10-1046422
NUT,SER-FLANGE,1/2-13 UNC,GRD8,YZ20-0006263
.250 x 1.00 x 2.50" SQUARE HOLE SPACERCM-SP106
4
1/2" FISHWIRE1_2 FISHWIRE65
PASSENGER SIDE FRAME RAIL
DRIVER SIDE
FRAME RAIL
EXISTING HOLE
(ENLARGE)
BOTH FRAME
RAILS
EXISTING HOLES
(BOTH FRAME
RAILS)
1
4
5
3
1. Using a T30 Torq bit, remove the (2) screws attaching the
bumper fascia to the body mounts. Save for re-installation
later.
Tow hook equipped models: Remove the (6) 14mm hex
bolts from vehicle frame and use to attach hitch. Follow
steps 2, 3, 5, 6, 8 and 9.
2. Use a 13mm socket to remove the (1) nut on each of the (2)
rearward most exhaust hanger brackets. NOTE: Support
the exhaust before removing the nuts to prevent damage to
the exhaust.
TIP: Temporarily removing the exhaust will ease installation of the hitch. Remove by loosening the
nut at the bolted connection in the middle of the vehicle with a 15mm socket.
DESIGNED FOR USE WITH
BALL MOUNT #45521
EURO MOUNT
OPTIONS AVAILABLE
#45571 (1 7/8" BALL)
#45572 (2" BALL)
TRAILHAWK
MODELS
ONLY
2