Installation Guide

CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
45900-INS-RC
•
PAGE 2
Built-in Anti-Rattle
The channel mount has a built-in anti-rattle
feature located on the back of the dual-ball
to keep your towing system quiet.
Step 1 - Insert into the Trailer Hitch
Begin by installing the channel mount (#1) into the trailer
hitch receiver. Secure it with the hitch pin and clip (#5).
Step 2 - Determine Required Ball Height
Determine the proper ball height by leveling the trailer and measuring
from the bottom of the trailer tongue to the ground, see below.
Find the hole closest to that measurement on the channel mount (#1).
The top pin of the dual-ball (#2) will go in that hole.
Secure all pins (#3) with the included clips (#4).
WARNING
The provided pins are specifically engineered for this system. If replacement pins
are needed, they must be replaced with original factory mount pins (CURT# 45925).
TrailerCoupler
Channel Mount
Level Ground
Drop
Rise
Vehicle
Receiver
Tube
BALL HEIGHT