Owners manual

INSTALLATION
/
SAFETY INSTRUCTIONS
Step 1
Carefully remove the storage pocket in the center of the
dashboard, just above the vehicle ashtray. Locate the grey,
4-pin vehicle brake control harness connector. It will be
connected to the back of the storage pocket. The connector
will be similar to that on the CURT brake control harness.
Step 2
Separate the vehicle harness from the storage pocket. Insert
the connector on the CURT brake control harness into the
vehicle connector. Make sure the connector is fully inserted
with locking tabs in place.
Step 3
Insert the brake control harness's black connector into the
brake control's quick plug connector. Secure the brake control
harness with the provided cable ties, avoiding any pinch points.
Step 4
Complete the installation using the brake control instructions.
Mount the unit as directed and perform test procedures as
instructed in the brake control user manual.
CURTMFG.COM • NEED ASSISTANCE? • 1.800.798.0813 • RA • PAGE 2