Installation Guide

Gas

Brake

E-brake

BH1

INSTALLATION INSTRUCTIONS

BRAKE CONTROL HARNESS

51382 & 51383 APPLICATIONS

Scan for helpful

installation tips

NOTICE

Make Model

Inﬁnti QX56

Nissan Armada

Nissan Frontier

Nissan Pathﬁnder

Nissan Pathﬁnder Armada

Nissan Titan

Nissan Titan XD

Nissan Xterra

BH1 - Under dash, left of steering column, near emergency brake pedal

Representative vehicle shown below

LOCATION GUIDE

All steps must be followed to ensure the CURT brake control

harness will function properly. Once installed, test for proper

function by following the brake control unit instruction manual.

Vehicles not equipped with an OEM trailer tow package, may

require fuses and relays to complete output and battery feed

circuits (sold separately). Consult owners manual for locations.

PAGE 1 • RA • NEED ASSISTANCE? • 1.800.798.0813 • CURTMFG.COM

PAGE 1
Scan for helpful installation tips INSTALLATION INSTRUCTIONS 51382 & 51383 APPLICATIONS Make Model Infinti QX56 Nissan Armada Nissan Frontier Nissan Pathfinder Nissan Pathfinder Armada Nissan Titan Nissan Titan XD Nissan Xterra BRAKE CONTROL HARNESS NOTICE All steps must be followed to ensure the CURT brake control harness will function properly. Once installed, test for proper function by following the brake control unit instruction manual.
PAGE 2
INSTALLATION / SAFETY INSTRUCTIONS Step 1 Locate the 6-pin, vehicle brake control harness connector under the dash, to the left of the steering column. It will be taped to another harness near the emergency brake pedal. The connector will be similar to that on the CURT brake control harness. Step 2 Insert the connector on the CURT brake control harness into the vehicle connector. Make sure the connector is fully inserted with locking tabs in place.