Owners manual

INSTALLATION
/
SAFETY INSTRUCTIONS
Step 1
Locate the 4-pin, vehicle brake control harness connector under
the dash, to the left of the steering column. It will be taped to
another harness near the emergency brake pedal. The connector
will be similar to that on the CURT brake control harness.
Step 2
Insert the connector on the CURT brake control harness into
the vehicle connector. Make sure the connector is fully inserted
with locking tabs in place.
Step 3
Insert the brake control harness's black connector into the
brake control's quick plug connector. Secure the brake control
harness with the provided cable ties, avoiding any pinch points.
Step 4
Complete the installation using the brake control instructions.
Mount the unit as directed and perform test procedures as
instructed in the brake control user manual.
CURTMFG.COM • NEED ASSISTANCE? • 1.800.798.0813 • RA • PAGE 2