Installation Guide

If copying/pasting, eye-drop this text to
ensure a uniform look for all installation
paragraphs.
1. Locate the vehicles factory tow harness
connector it will be located behind the
bumper and will have connection points
similar to the harness connector. On the
Ranger it will be located on the drivers side.
On the Explorer it will located on the
passengers side.
2. Remove protective cap and insert
harness connector into the vehicles tow
harness connector. Make sure the
connectors are fully inserted with locking
tabs in place.
3. Route the 4-flat to the center of the
vehicle and secure in a convenient out of
the way location. Secure any loose wires
with the cable ties provided.
WARNING!
Verify miscellaneous items that may be
hidden behind or under any surface before
drilling to avoid damage and/or personal
injury.
03/26/09
55241
FORD EXPLORER
FORD RANGER
MAZDA B-SERIES PICKUP
MERCURY MOUNTAINEER