Installation Guide

If copying/pasting, eye-drop this text to
ensure a uniform look for all installation
paragraphs.
1. Locate the vehicles trailer wiring harness
behind the rear bumper next to the spare
tire. The vehicles harness will have a
connector that is similar to the connector
on the harness.
2. Insert the harness connector into the
vehicles connector. Make sure the
connectors are fully inserted with locking
tabs in place.
3. Route the 4-flat to the center of the
vehicle and secure in a convenient out of
the way location. Secure any loose wires
with the cable ties provided.
WARNING!
Verify miscellaneous items that may be
hidden behind or under any surface before
drilling to avoid damage and/or personal
injury.
5/26/09
55247
FORD F-250 SUPERDUTY
FORD F-350 SUPERDUTY