Installation Guide

If copying/pasting, eye-drop this text to
ensure a uniform look for all installation
paragraphs.
1. Locate the vehicles factory tow harness.
It is located under the vehicle in location S6
along to drivers side frame rail. It will
have connectors similar to those on the
T-connector.
2. Disconnect the connectors making sure
not to damage the locking tabs. Insert the
T-connector end in-between the
disconnected connectors making sure the
locking tabs are locked into place.
3. Locate a suitable grounding point near
the connector such as an existing screw
with nut in the vehicle’s frame or drill a
3/32” hole and secure white wire using
eyelet and screw provided.
4. Route the 4-flat to the center of the
vehicle and secure in a convenient out of
the way location.
WARNING!
Verify miscellaneous items that may be
hidden behind or under any surface before
drilling to avoid damage and/or personal
injury.
03/30/09
55319
CADILLAC ESCALADE
CHEVROLET BLAZER
CHEVROLET SUBURBAN
CHEVROLET TAHOE
GMC SUBURBAN
GMC YUKON