Installation Guide

If copying/pasting, eye-drop this text to
ensure a uniform look for all installation
paragraphs.
01/20/09
55358
1. Locate the vehicle wiring inside the
vehicle's trunk by removing each of the
plastic trim panels. There will be connection
points matching the ends of the
T-connector.
2. Beginning with the driver's side, separate
the vehicle's wiring connectors, being
careful not to break the locking tabs. Attach
each end to the T-connector containing the
yellow wire. Ensure that the connectors are
fully inserted with locking tabs in place.
3. Remove rear trunk fascia inside the trunk
and route the wire to the passenger side of
the vehicle. Repeat step 2 using the
T-connector containing the Green wire.
4. Locate a suitable grounding point near
the adapter. Drill a 3/32" hole and secure
the white wire using the eyelet and screw
provided.
5. Secure the any loose wires and the black
converter box to the vehicle using the cable
ties and double sided tape provided.
Reattach all trim panels.
WARNING!
Verify miscellaneous items that may be hidden
behind or under any surface before drilling to
avoid damage to vehicle and/or personal injury.
TOYOTA CAMRY