Installation Guide

ManualsBrandsCURT ManualsOtherCURT 55384 Vehicle Side Custom USCAR Vehicle Trailer Wiring Harness for Towing, 4-Pin Trailer Wiring

Make Model

Buick Enclave

Buick Rainier

Cadillac Escalade

Cadillac Escalade ESV

Cadillac Escalade EXT

Cadillac Escalade Hybrid

Chevrolet Avalanche

Chevrolet Colorado

Chevrolet Express

Chevrolet Silverado

Chevrolet Silverado Hybrid

Chevrolet Suburban

Chevrolet Tahoe

Chevrolet Tahoe Hybrid

Chevrolet Trailblazer

Chevrolet Traverse

Chrysler Aspen

Dodge 1500 RAM

Dodge 2500 RAM

Dodge 3500 RAM

GMC Acadia

Make Model

GMC Canyon

GMC Envoy

GMC Sierra

GMC Yukon

GMC Yukon Denali

GMC Yukon XL

GMC Yukon XL Denali

Hummer H2

Hummer H3

Hummer H3T

Inﬁniti QX56

Isuzu Ascender

Kia Borrego

Nissan

Pathﬁnder Armada

Nissan Titan

Oldsmobile Bravada

Saab 9-7X

Saturn Outlook

PICKUP TRUCKS

(

)

Representative vehicle shown below

T3 - Behind driver's side rear bumper

T4 - Behind center of rear bumper fascia

T3 T4

INSTALLATION INSTRUCTIONS

55384 USCAR ADD-ON WIRING LOCATION GUIDE

APPLICATIONS

Scan for helpful

installation tips

DO NOT EXCEED PRODUCT RATING OR TOW VEHICLE'S LAMP LOAD RATING, WHICHEVER IS LOWER

NOTE

All steps must be followed to ensure the T-connector

will function properly. Once installed, test the function

by connecting a test light or properly wired trailer.

Check vehicle owner's manual or contact

the vehicle manufacturer for more information.

SUVS, MINI & FULL-SIZED VANS

(

)

Representative vehicle shown below

S3 - Behind driver's side rear access panel

S4 - Behind passenger's side rear access panel

S5 - Behind driver's side rear bumper

S6 - Behind center of rear bumper

S7 - Behind passenger's side rear bumper

S5 S6 S7

S3 S4

PAGE 1 • 55384-INS-RA • 1.877.287.8634 • NEED ASSISTANCE? • CURTMFG.COM

Summary of content (2 pages)

PAGE 1
Scan for helpful installation tips INSTALLATION INSTRUCTIONS DO NOT EXCEED PRODUCT RATING OR TOW VEHICLE'S LAMP LOAD RATING, WHICHEVER IS LOWER 55384 USCAR ADD-ON WIRING LOCATION GUIDE PICKUP TRUCKS (T) Representative vehicle shown below T3 - Behind driver's side rear bumper T4 - Behind center of rear bumper fascia T3 T4 SUVS, MINI & FULL-SIZED VANS (S) Representative vehicle shown below S3 - Behind driver's side rear access panel APPLICATIONS S4 - Behind passenger's side rear access panel Make
PAGE 2
INSTALLATION For vehicles without a Factory 7-way: For vehicles with a Factory 7-way: Step 1 Access the vehicle's wiring harness connectors behind the driver's side rear bumper in position T3 as shown in the 'Wiring Location Guide'. Step 1 Locate the factory 7-way attached to the hitch, behind the center of the rear bumper in position T4 as shown in the 'Wiring Location Guide'. Step 2 Locate the vehicle battery. Look up the battery location in the owner's manual of your vehicle.