Installation Guide

6. Secure the black converter box near the
battery on inside of tire storage
compartment using double-sided tape
provided.
7. Route the housings with the yellow wire
to the drivers side of the vehicle and repeat
step 4.
8. Route the 12 gauge yellow wire with ring
terminal to the battery and secure the
positive post. Insert 10 amp fuse in fuse
holder and reconnect negative battery wire.
9. Finish by returning all parts removed
from vehicle to their original positions. Test
the installation with a test light or trailer to
verify proper function. Leave 4-flat in tire
storage area, route to center of vehicle
when using.
WARNING!
Verify miscellaneous items that may be
hidden behind or under any surface before
drilling to avoid damage to avoid damage
to vehicle and/or personal inury.