Installation Guide

RED - “TO STOP SIGNAL”
GREEN - “TO RIGHT TURN SIGNAL” (SEE FIGURE D)
YELLOW - “TO LEFT TURN SIGNAL”
WHITE - “GROUND”
(SECURE TO TOW VEHICLE FRAME
USING SCREW PROVIDED.)
BROWN - “TO TAILLIGHT SIGNAL”
VEHICLE WIRE
CONVERTER WIRE
MOUNT CONVERTER USING
DOUBLE-SIDED TAPE PROVIDED
TO SPLICE INTO WIRES, PUSH METAL
LOCK DOWN WHEN WIRES ARE FULLY
INSERTED
PLACE CONVERTER ON DRIVER’S SIDE OF VEHICLE
AND ROUTE GREEN WIRE TO PASSENGER SIDE OF VEHICLE
THIS CONVERTER SYSTEM IS TO BE USED ONLY
ON 12 VOLT NEGATIVE GROUND SYTEMS
(ILLUSTRATION NOT TO SCALE)
Manufacturing