Installation Guide

1. Locate the tow vehicle’s trailer harness
connector. This connector is located under
the vehicle, behind the bumper, on the
driver’s side of the vehicle.
2. Remove protective cap from connector
taking care not to damage the locking tabs.
Return the protective cap to the vehicles
owner for future use.
3. Insert the harness connector into the
vehicle’s connector (A,B). Make sure that
the T-Connector is fully inserted with
locking tabs in place.
1/18/2011
56515
BUICK ENCLAVE
BUICK RAINIER
CADILLAC ESCALADE
CHEVY AVALANCHE
CHEVY SILVERADO
CHEVY TAHOE
CHEVY SUBURBAN
GMC SIERRA
GMC YUKON
HUMMER H2 & H3
INFINITI QX56
ISUZU ASCENDER
NISSAN TITAN
NISSAN PATHFINDER
CHEVY TRAILBLAZER OLDSMOBILE BRAVADA
GMC ACADIA SAAB 9-7X
GMC ENVOY SATURN OUTLOOK
INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634