Specifications

8
Curtis 1310 Manual, Rev. B
13 Input/Output 13 A switch to B+ digital input with Put_PWM SW_13
an open collector high-frequency Automate_PWM SW_13_UP
PWM output. Signal is pulled SW_13_Down
to B- when output is on. PWM13
14 Input/Output 14 A switch to B+ digital input with Put_PWM SW_14
an open collector high-frequency Automate_PWM SW_14_UP
PWM output. Signal is pulled SW_14_Down
to B- when output is on. PWM14
15 Input/Output 15 A switch to B+ digital input with Put_PWM SW_15
an open collector high-frequency Automate_PWM SW_15_UP
PWM output. Signal is pulled SW_15_Down
to B- when output is on. PWM15
16 Input/Output 16 A switch to B+ digital input with Put_PWM SW_16
an open collector high-frequency Automate_PWM SW_16_UP
PWM output. Signal is pulled SW_16_Down
to B- when output is on. PWM16
17 Input 17 A switch to B+ digital input SW_17
(pulled low to B-). Switch this pin SW_17_UP
to B+ to read as ON. SW_17_Down
18 Input 18 A switch to B+ digital input SW_18
(pulled low to B-). Switch this pin SW_18_UP
to B+ to read as ON. SW_18_Down
19 Input 19 A switch to ground digital input SW_19
(pulled high to +15V). Switch SW_19_UP
this pin to B- to read as OFF. SW_19_Down
20 Input 20 A switch to ground digital input SW_20
(pulled high to +15V). Switch SW_20_UP
this pin to B- to read as OFF. SW_20_Down
21 Input 21 A switch to ground digital input SW_21
(pulled high to +15V). Switch SW_21_UP
this pin to B- to read as OFF. SW_21_Down
22 Input 22 A switch to ground digital input SW_22
(pulled high to +15V). Switch SW_22_UP
this pin to B- to read as OFF. SW_22_Down
23 B- CAN be used as a low power
(<2 amp) ground reference or for
switch inputs 12–22 B- reference.
24 B+ Can be used to power the system Setup_BDI ADC13_Output
(<2 amps) or for B+ reference KSI_Filtered
for switches, etc. KSI_Raw
2 — INSTALLATION & WIRING: Connector J1
Table 2 Connector J1: Inputs/Outputs, cont’d
RELATED VCL
PIN NAME DESCRIPTION
FUNCTIONS REFERENCES
Note: Model 1310-5210 is not fully “stuffed.” This model has Outputs 9–16
available, and Inputs 1–13, 16, and 19–22. Outputs 14 and 15 have over
200kΩ output impedance.
☞