Instruction manual

17 | Page

SELECTING A FORMULATION

Thermal fogging is an efficient and economical non-residual method of controlling

insects. But the fog machine can not do the job alone. The proper insecticide,

properly formulated is absolutely necessary. The machine will accept ineffective,

poorly compounded solutions and the fog will appear no different from an

efficient and well formulated compound, but the killing power will be lacking. It

requires insecticide to kill insects.

Improperly compounded formulations can promptly drop out of solution in the

formulation system and give poor results. Your distributor is usually qualified to

make recommendations and to furnish properly formulated insecticides; but if you

have any specific questions or doubts, feel free to contact the factory.

CAUTION

Use only formulations prepared for thermal fogging and for the specific job to be

accomplished. This information should be found on the formulation label.

WARNING

THIS DEVICE IS DESIGNED TO DISPENSE CHEMICAL SOLUTIONS IN A

FOG. MOST OF THE CHEMICAL SOLUTIONS WHICH MAY BE DISPENSED

WITH THIS MACHINE REQUIRE REGISTRATION WITH OR APPROVAL BY

VARIOUS GOVERNMENT AGENCIES. USE OF SOME OF THESE

SOLUTIONS MAY BE RESTRICTED, REGULATED OR PROHIBITED IN

CERTAIN AREAS.