Instruction manual

21 | Page

FLOW RATE GPH (LPH)

1.2 (4.5)

2.8 (10.6)

5.4 (20.4)

6.5 (24.6)

7.6 (28.8)

8.2 (31.0)

8.5 (32.2)

8.8 (33.3)

9.3 (35.2)

9.6 (36.3)

METERING VALVE SETTING

BEFORE FOGGING (Cont’d)

STEP 2: The normal required formulation Volume is:

(3900cu.ft.) x (1 oz.

) = 1.3 ounces

3000 cu. ft.)

STEP 3: The normal time to fog 1.3 ounces is:

(1.3 oz.)

X (5 oz.)

(t seconds) (60 seconds)

t seconds = (60 seconds) (1.3 oz.) = 15 seconds

5 oz.

where t = normal time to fog, and 5 oz. is the average machine flow rate to

achieve a "dry fog."

FOGGING OUTDOORS:

Read and follow all

cautions and warnings

for "Dispensing Fog".

Read and follow the

instructions for thermal

fogging on the chemical

solution label.

(OPTIONAL METERING

VALVE)

VALVE SETTING

VS. FLOW RATE:

This graph represents an

approximate cross reference between the metering valve setting (0-10) and the

formulation flow rate. This graph was derived using 467 Base oil (approximately

1 centipoise viscosity) as the formulation being fogged.