Instruction manual

24 | Page
Copyright © 2009 Curtis Dyna-Fog, LTD.
WARNING
DO NOT USE ANY SUBSTANCES FROM UNMARKED CONTAINERS OR
FROM CONTAINERS WITH OBVIOUSLY ALTERED LABELS. READ AND
FOLLOW THE INSTRUCTIONS ON THE CHEMICAL SOLUTION LABEL FOR
THERMAL FOGGING OF THE SOLUTION.
4. Place the Formulation Tank Cap on the Formulation Tank and rotate it
clockwise (CW) until the stop is reached.
NOTE
The Formulation Tank must be sealed air tight for the machine to operate
properly.
CAUTION
Read the entire OPERATION SECTION and the section on SAFETY
PRECAUTIONS before starting the machine for the purpose of dispensing fog.
WARNING
DO NOT UNDER ANY CIRCUMSTANCES USE A WET FOG IN A CLOSED
AREA.
DO NOT FOG ANY ENCLOSED SPACE OF LESS THAN 500 CUBIC FEET (14
CUBIC METERS) WITH THIS MACHINE.
DO NOT FOG AN ENCLOSED SPACE FOR MORE THAN 7.5 SECONDS FOR
EACH l000 CUBIC FEET (28 CUBIC METERS) OF ENCLOSED SPACE. (THIS
INFORMATION IS BASED ON A MACHINE FLOW RATE OF 9 U.S. GPH (34
LT./HR.) OR 19 OZ./MIN. (568 ML/MIN.) (EQUIVALENT OF 1 GALLON/50,000
CU. FT.) YOUR MACHINE IS CAPABLE OF PRODUCING HIGHER FLOW
RATES THAN 9 GPH (34 LT./HR.).