Instruction manual

25 | Page

NEVER FOG INDOORS USING A FLOW RATE THAT PRODUCES A WET

FOG (SEE SECTION “PREPARING TO DISPENSE FOG”). EXTINGUISH ALL

OIL AND GAS PILOT LIGHTS AND TURN OFF ALL ELECTRICAL POWER IN A

CLOSED AREA BEFORE FOGGING.

DO NOT FOG NEAR AN OPEN FLAME OR HOT MATERIALS. THIS

INCLUDES LIGHTED MATCHES, CIGARETTES, ETC.

NEVER LEAVE THE MACHINE UNATTENDED.

IF THE ENGINE STOPS FOR ANY REASON, RELEASE THE FORMULATION

ON/OFF LEVER IMMEDIATELY.

IF AN EXTERNAL SOURCE IGNITES OR TORCHES THE FOG, RELEASE

THE FORMULATION ON/OFF LEVER IMMEDIATELY.

DO NOT AT ANY TIME PLACE THE MACHINE ON ITS SIDE.

DO NOT PLACE THE DISCHARGE (EXHAUST) END OF AN OPERATING

MACHINE CLOSER THAN 24 INCHES (61 CM) TO A WALL OR OTHER

OBSTRUCTION. THIS CAN CAUSE THE ENGINE TO OVERHEAT AND

CAUSE THE MACHINE TO SUFFER PERMANENT DAMAGE LEADING TO A

FIRE OR EXPLOSION.

DO NOT TOUCH THE HOT ENGINE TUBE. ALLOW SUFFICIENT COOLING

TIME AFTER OPERATION BEFORE ATTEMPTING ADJUSTMENT, REPAIR

OR MAINTENANCE.