Instruction manual

33 | Page

CLEAN THE ENGINE DISCHARGE (EXHAUST) TUBE

1. Using the Clean out Tool provided, (Fig. 4) insert the brush into the engine

discharge (exhaust) tube and rotate it clockwise (CW) as you push the tool into

the tube as far as the handle permits.

Figure 4

2. Continue rotating the tool in the same direction and pull back and remove the

brush from the tube.

NOTE

It is not normally necessary to push and pull hard on the brush handle; however,

if the engine tube is not cleaned regularly, it becomes increasingly difficult to

clean. Push and pull gently and continue rotating.

Loose carbon will be removed from the tube when the engine is next started.

CLEAN OUT BRUSH COMPLETELY INSERTED

INTO ENGINE TUBE