Instruction manual

52 | Page

3. Is there an air leak at the bottom on the Carburetor Assembly? Tighten the two

carburetor mounting screws.

4. Is the Fuel Needle out of adjustment causing the machine to run weak? See

the CARBURETOR section.

5. Is the gasoline bad or dirty?

6. Is there large amounts of air in the gasoline line? Air bubbles make the

machine run weak. Check the fuel line connections, including the two lines from

the primer bulb to the Carburetor.

Symptom: The machine will not fog.

Check:

1. Is the Formulation Tank pressurized when the machine is running? If not, the

pressurizing valve is bad or installed backwards.

2. Check the formulation delivery lines from the tank to the injection point on the

engine to see if they are clogged. Trace the fluid path from the tank to the

injection orifice at the engine.

3. Is the pressurizing valve in backwards? See the section on WORKING

PRINCIPLES.

4. Check for carbon at the injection point. See MAINTENANCE section.

5. Does the Formulation Tank Cap leak?