PERSONAL CD PLAYER WITH ANTI-SKIP PROTECTION OWNER'S MANUAL MODEL: CD266 PLEASE READ BEFORE OPERATING THIS EQUIPMENT
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY PRECAUTIONS INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Dear Customer: Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS 3 11 9 2 15 1 12 7 13 14 10 6 8 4 5 1. Display 2. PROGRAM Button 3. DC 4.5V Jack (Side of Unit) 4. CD Compartment 5. CD Door Open Switch 6. Line Out Jack (Side of Unit) 7. Play/Pause ( )/Power on Button 4 8. Phones Jack (Side of Unit) 9. SKIP UP Button 10. SKIP DOWN Button 11. STOP ( ) Button 12. MODE Button 13. VOLUME UP 14.
POWER SOURCES This CD player requires either two (2) "AA" batteries (not included) or the AC adapter (not included). BATTERY INSTALLATION The low battery indicator will light in the display when batteries are low (when using battery power). 1. Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it. To prevent the possibility of losing the cover, it cannot be removed. 2.
POWER SOURCES (CONTINUED) NOTES: • Please read the battery instructions that came with the batteries. • IMPROTANT: Make sure to recycle rechargeable batteries at the end of their useful life. Check with your local waste officials for details regarding recycling. Audio Sound Through a Home Audio System By using a home audio connection cable (not included), superb audio sound can be heard through your home audio system. Before making any connections, turn off the power to all equipment.
OPERATION Press the PLAY/PAUSE ( )/Power On button to turn the unit on. To turn the unit off, press the STOP ( )/Power Off button twice. The unit will automatically shut off if stopped (CD Standby) for 30 seconds. TO INSERT AND PLAY A CD This unit plays CD, CD-R and CD-RW discs. Note: CD-R/CD-RW discs must be first be finalized. Press the PLAY/PAUSE ( )/Power On button to turn the unit on. Open the CD door by sliding the CD Door Open switch.
OPERATION (CONTINUED) CD PLAYBACK NOTES: • When reocrding ("burn") CDs, make sure the session is "finalized", or simply record ("burn") only one session. You can find more information in your recorder's manual. • This unit is capable of playing standard CDs or 3" singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present al all, "No Disc" will appear in the display. • If a disc is not recorded properly, a disc error will occur and the unit will not play back the CD.
OPERATION (CONTINUED) TO BEGIN PLAYBACK FROM A SPECIFIC TRACK After you insert the disc into the CD player and the total number of tracks appears on the display, you may press either the Skip/Search or button to select a specific track for playback. When the desired track number appears in the display, press the PLAY/PAUSE ( )/Power On button. Playback will begin with the track (or file) you selected.
OPERATION (CONTINUED) REPEAT PLAYBACK OF ONE TRACK To repeat a single track, while in the Stop mode, press the Skip/Search button to select the specific track that you wish to repeat. Press the MODE button once, the Repeat 1 indicator will appear in the display. When the desired track number appears in the display, press the PLAY/PAUSE ( )/Power On button to begin playback. The specific track you selected will be repeated continuously. To cancel repeat playback of the track 1.
OPERATION (CONTINUED) TO RANDOMLY PLAYBACK A CD While in the Stop mode, press the MODE button 4 times; "RAND" will appear in the display. Press the PLAY/PAUSE ( )/Power On button to begin playback. The unit will play all the tracks in random order. When all the tracks have been played, the unit will stop. To cancel Random playback, press the MODE button once to return to normal playback. To cancel Intro or Random playback: 1.
OPERATION (CONTINUED) Press the PROG. Button to memorize the track. Repeat steps 2 and 3 to program additional tracks. Press the PLAY/PAUSE ( playback. )/Power On button to begin program NOTES ON PROGRAM PLAYBACK • To add a track to the program memory, simply press the PROG. button repeatedly until the track appears and "PROG" blinks in the display, then continue as per the steps 2 and 3 on the previous page.
CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disconly by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. Symptom Possible Cause Unit will not turn on. Weak or dead batteries. Batteries not inserted correctly. AC adapter not connected. Disc will not play. No sound from headphones. Erratic playback. Solution Replace batteries. Insert correctly. Check AC adapter connection. CD compartment not closed. Close CD compartment Disc inserted incorrectly. Reinsert disc correctly.
SPECIFICATIONS LINE OUT Frequency Response 20 to 20,000 Hz Tracking System 1-beam laser Laser Pick-up Semiconductor laser D/A Conversion 8-times oversampling digital filter +1 bit DAC POWER SOURCE Batteries AC adaptor Dimensions Weight Accessories 3V DC, (2 "AA" size) Input Voltage: AC 120V Output Voltage: DC 4.5V, 600mA, Positive Center 5.5 (D) x 5.5 (W) x 1.25 (H) inches 0.
LIMITED PRODUCT WARRANTY Audio Product Telecom Product TV DVD Player This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.
