5.1 ch output INSTRUCTION MANUAL mp3 IMPORTANT READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE.
SAFETY INFORMATION Installation Warnings Ventilation slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not the blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or heat register.
FEATURES DVD, CD, MP3, Picture CD compatible CD-R, CD-RW capable Video output: Composite Video output S-Video output YPbPr output Audio output: Down-mix stereo output Digital digital output DTS surround output Coaxial output Optical output 5.
INTRODUCTION THE REMOTE CONTROL Loading batteries to the remote control Remove the battery compartment cover. UM RO Make sure that the batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover. 3. 1. -4 5V (A X2 AA ) Load two AAA (UM-4 ) batteries into the battery compartment. When replacing batteries, replace both batteries.
Select a DVD disc DVD Region Code DVD discs and DVD players are manufactured under the worldwide agreed DVD Regional Code System that the player will operate only with corresponding disc of the same Regional Code. Region code Region 1 Canada, USA 2 Europe (incl. Poland, Romania, The Czech republic), Japan, Middle East (incl. Saudi Arabia, Egypt, Iran, South Africa) 3 East Asia (incl.
INTRODUCTION About the player Front panel 2 4 5 3 1 POWER PLAY/PAUSE OPEN/CLOSE R/L STOP Back panel 9 1 2 6 4 3 5 8 7 15 14 10 11 12 13 1 5.1CH OUT 8 2CH R input jack 2 Digital signal COAXIAL output jack 9 Y Pb Pr 3 5.1CH FL output jack 10 Digital signal OPTICAL output jack 11 5.1CH FR output jack 4 5.1CH SL output jack 5 5.1CH CEN output jack 12 5.1CH SR output jack 6 Video output 13 5.
INTRODUCTION Remote control REMARK Some features of the player can only be performed by the remote control. Some features described in this owner's manual are related to the Disc's encoding. Some features may not be available, if the disc encoding does not support the feature. Some features contained in this DVD player are related to theDVD Disc's software. Some features cannot be performed if the disc does not support the feature, or requires special settings.
SYSTEM CONNECTION Preparations Accessories 1. Remote controller 2. Audio/Video cable 3. User's manual (check whether be fully equipped after open the box) Battery installation of remote controller Place two AAA(UM-4) in the battery compartment. Be sure the polarities are correct. There should be no large obstacles between the remote controller and the main unit. System connection 1. When making connection between this unit and other components, be sure all connection with power-off. 2.
~110V 60Hz 67
CONNECT THE DVD TO A TV USING THE Y/Pb/Pr JACKS. Use the COMPONENT Cable(not supplied) to connect DVD player to your TV. To use it, you must press P-SCAN button to switch the video mode to progressive scan or YUV.
CONNECTIONS TV SET CONNECTIONS CONNECT DVD PLAYER TO TV SET BY AV CABLE Connect the Composite video cable (supplied) to connect your unit and your TV. Audio IN Video IN Video cable Audio cable CONNECT DVD PLAYER TO TV SET BY S-VIDEO SOCKET Connect the S-VIDEO cable(not supplied) to connect DVD player and your TV.
GETTING STARTED REMARK Unpack the unit. Some features contained in this DVD player are related to the DVD disc's software. Some features cannot be performed if the disc does not support The feature, or requires special settings. Check the features printed on the disc's packing or follow the instructions of the Disc's on screen menu. Read through this owner's manual before installation and use. Load batteries into the remote control unit. Connect the system,make sure the connections are secured.
GETTING ST ARTED Video port setup The DVD player is equipped with the following video ports: Composite Video (V) (Always active) S-Video (Default option) The DVD player has been pre-set at the factory to Composite Video (V) and S-Video outputs, as default settings. The player is equipped with the following video output ports: Composite Video and S-Video always active, does not need setting.
GETTING ST ARTED Screen saver ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... The player is equipped with an automatic screen saver, for the purpose of protecting the TV screen.
FUNCTION BUTTONS Power ON / OFF POWER ON /OFF To switch the player Between power on and off mode: Press POWER button on front panel or POWER button on the remote (Always switch off the player after use) Open /Close disctray To open and close The disc tray: Press EJECT button on the remote Play / Pause/ Stop 1 Press PLAY button To play the Disc 2 Then Press PAUSE button to pause. Press 2 1 3 3 to resume normal playback.
FUNCTION BUTTONS Skip Forward / Backward 1 Press to skip forward (chapters) 2 Press to skip backward (chapters) Player will not advance or reverse during "WARNING" section of any disc.
FUNCTION BUTTONS Select an item in menu In the disc menu or setup menu 4 press cursor button 1 to move between function items. 3 2 Press to confirm a selection. 1 2 3 Press to cancel an entry. 4 Press to return to the previous menu. Disc TItle /Menu 1 Press MENU button return to the DVD disc Menu. 1 2 Press TITLE Button return to the DVD disc Title. 2 Disc MENU Disc menu is a DVD disc feature, allowing users to select functions on screen.
FUNCTION BUTTONS Multi-Angle If a DVD disc contains Multi-Angle feature, viewing angles may be selected: 1 1 During in playback, repeat pressing ANGLE button to select the desired viewing angle Status will be displayed on screen.. A DVD disc may contain up to 9 selectable viewing angles. ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... ..... .... 15 1/3 Total angles Current angle ..... .... ..... .... ..... .... ....
FUNCTION BUTTONS Multi-Audio Soundtrack If a DVD disc contains Multi-Audio Soundtrack feature, Audio Language can be selected: 1 During in playback, repeat pressing AUDIO button AUDIO 1 to select the desired audio language. Playback status will be displayed on screen. Total subtitle NOTE A DVD disc may contain up to 8 audio language selections. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1 / 3 Eng 6 Ch ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..
FUNCTION BUTTONS PSCAN 2 1 First,You should press[STOP] Key 2 Press [PSCAN]key STOP PSCAN you can select Progressive scan mode out, Repeat step 1 2 mode out.
FUNCTION BUTTONS SEARCH a desired section This functi on does NOT apply to 1 M P3 SEARCH 1 Press the SEARCH button to play at a desired Title, Chapter or Time. DVD disc SEARCH Press the SEARCH button select SEARCH Mode. Press LEFT/RIGHT TITLE --CHAPTER --TIME --:--:-Press ENTER button highlight desired item. Input title number Input chapter number Input time hh:mm:ss (Hour : Minute : Second) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
FUNCTION BUTTONS Repeat the section A-B 20 1 To repeat playback of a desired section: A-B 1) Press the A-B button at the beginning of the desired section, "A". A-B 2) Press the A-B button again at the end of the desired section, "B". ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... Rep A - B ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... .........
FUNCTION BUTTONS ZOOM In DVD mode ZOOM 1 ZOOM Press the ZOOM to enlarge viewable Button picture. Press the button repeatedly to change Q1 Q2 Q3 Q4 the zoom scale: Off 21 2 2 Press the CURSOR buttons to adjust the zooming position. 2 2 2 Enlarged scale ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ...
FUNCTION BUTTONS 3D When play svcd,vcd CD Mp3 disc 1 Press “3D”button 3D in turn it delivers “ on ”on the screen, then the second 3D press“3D”button , it Delivers “ off ” 1 2 ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... on ......... ......... ......... ......... .......
FUNCTION BUTTONS Program setting P rogram to play a DVD, CD and MP3 disc in a desired sequence automatically,In. "STOP"mode , DVD program menu Load a DVD disc. PROG 1 Press the PROG button, the DVD program menu will appear. 2 Use numeric key pad Program Input to input the Title number and the Chapter number, Repeat step 2 until programming is completed.
FUNCTION BUTTONS Return RETURN 1 In PBC mode, when pressing “RETURN” Key to return to the menu, thus canceling the PBC mode , the “RETURN” key will be invalid 1 2 Mark 3 1 2 STORING MARKS MEMORY 1. Press the “MARK” button on remote control during the disc is played and the menu of mark setting with two bookmarks will appear on the screen. 2.
The OSD indicator is a user friendly interface designed for displaying the status of the playback. When a dif ferent disc is loaded (DVD, CD Or MP3), the OSD indicator bar will be different. Press OSD button , an On Screen Display (OSD) indicator will be displayed at the upper part of the TV screen in displaying the disc information and operation status. The OSD indicator will remain on screen until pressing the OSD button to turn it off. OSD - DVD mode ... ... ... ... ... ... ... ... ... ... ... ... ...
ON SCREEN DISPLAY MP3 mode Playback time Current folder Disc T rack current track / total tracks ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... Mp3 2/133 00:02:43 [Root] 1 2 3 4 5 001 002 003 004 005 6 7 8 9 10 006 007 008 009 010 File: 002 ......... ......... ......
SETUP Various features of the player can be adjusted in the SETUP menu: Video Enter this menu to setup the video setting Press SETUP Press SETUP button SETUP menu appears. button Highlight "Video", Press ENTER Language Video Audio More aud ENTER , Video sub menu appears. Rating Language Video Audio TV shape Video output More aud Rating 4:3LB S-video 4:3PS 4:3LB 16:9 Highlight the desired icon Press ENTER button to activate the setting sub menu.
SETUP MENU (Press SETUP button) 16:9 Wide Scr More Aud When you connect to a wide screen TV , this setting will allow the original aspect ratio will be display full screen. Enter this menu to setup the digital audio output of different signal type. SETUP In "STOP" mode,press SETUP button. Highlight"More Aud" NOTE Depending on the DVD disc format, e.g. 2.35:1, the wide screen setting may still having black margins above and below the picture. Press ENTER ENTER ,More Audio sub menu appears.
TROUBLE SHOOTING Should your DVD player develop a problem, please check below before requesting service: Symptom Check and Action No Power Check if the power cord has been properly connected Does not play No disc, load a disc. to the power outlet. Check if the main power has been switched on. Disc has been loaded upside down. Place the disc with the label side up. Disc's region code does not match to the player. Disc is not correct type for player.
TROUBLE SHOOTING CAUTION RISKOF ELECTRIC SHOCK DO NOT OPEN Symptom Cannot SKIP or SEARCH CAUTION : To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to qualified service personnel. Check and Action Some discs are programmed that do not allow users to SKIP or SEARCH at some sections, especially at the beginning WARNING section. Single Chapter disc No sound or sound output not complete cannot apply SKI P function.
SPECIFICATIONS Type of Disc Audio Format DVD CD-DA CD-MP3 Kodak Picture CD CD-R / CD-RW MPEG 1, LAYER 1, LAYER 2 , LAYER 3 Signal Output Audio System: DTS digital output Audio DAC 16bit/48KHz Video Output: Audio Output: 1 Vpp (at 75 ohm) 2 Vpp Frequency Response CD: 4Hz 20KHz (EIAT) DVD: 4Hz 22KHz (48K) 4Hz 44KHz (96K) S/N radio > 92 dB THD Output Terminals Power input < 0.04% Video (composite) output X 1 S-Video output X 1 5.
