MODEL NO.
SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3.
SAFETY INSTRUCTIONS 21. DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions.
PREPARATION FOR USE Power Sources Power the unit by connecting it to a standard AC outlet (230V ~ 50Hz) via the attached AC adaptor. Changing the Remote Battery WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only with the same or equivalent battery. OPEN LI TH IU CR M BA 20 TT 3V 25 ER Y CR2025 Y ER TT BA 25 UM 20 HI CR 3V CR2025 T LI OPEN 5 PUSH a. Push the Release Button and pull out the Battery Compartment to access the battery. b.
LOCATION OF CONTROLS REP ALL AM ROCK SLEEP 3 4 1 11 19 22 20 18 16 23 14 24 10 17 TIMER 13 21 OPEN/CLOSE 7 6 12 15 2 6 5 9 8
LOCATION OF CONTROLS FEATURE DEFINED 1 LCD – View the Time, iPod Indicator, and Radio Frequency through this Liquid Crystal Display. 2 Backup Battery Compartment – For Clock Backup (1.5V AAA x 2pcs) 3 CD DOOR – Open using the CD OPEN button. 4 iPOD DOCKING STATION - Connect your iPod, iPod mini, iPod nano. 5 SPEAKER JACK – Left and Right speaker jack to connect external speaker. 6 PHONE JACK – Use the phone jack to connect a set of ear buds or headphone to the unit.
LOCATION OF REMOTE CONTROLS R1 R24 R2 R23 R22 R3 R4 R21 R5 R20 R6 R19 R7 R18 R8 R17 R9 R16 R10 R15 R11 R14 R12 R13 FEATURE DEFINED R1 MUTE – Use mute the audio sound. R2 STANDBY – Press the standby button to turn the unit off or on. R3 MENU/PROG /MEM/CLK SET – Press the button to program a loaded CD or to move backwards through the menus on a docked iPod. In radio mode, press the button to save a radio station to the units memory. In standby mode, press the button to set the clock.
LOCATION OF REMOTE CONTROLS R11 REPEAT/M- BUTTON – Press the Repeat button once to repeat an individual song on a docked iPod or CD single track. Press the Repeat Button twice to repeat an album / play list on a docked iPod or entire CD. In radio mode, press the button cycle through saved radio stations in radio mode. R12 STOP/BAND BUTTON – Press the button to stop CD or iPod playing. In radio mode, press the button to select the radio band. R13 BATTERY DOOR – BATTERY DOOR for remote control.
Included Bracket iPod Model 6 7 6 7 8 9 10 8 9 10 13 14 10
OPERATION Setting the Clock 1. Press the STANDBY button to turn the unit off, then press and hold the CLK button. 2. Use the FWD/PEV buttons to select 12Hr or 24Hr clock, and press the CLK button to confirm the selection. 3. Press the FWD/PEV buttons to adjust the hour, and press the CLK button to confirm the hour. 4. Press the FWD/PEV buttons to adjust the minute, and press the CLK button to confirm the minute. Setting the Timer 1.
OPERATION Playing a CD 1. Press the STANDBY button to turn the unit on. 2. Press the FUNCTION button and switch the unit to CD mode. 3. Press the OPEN/CLOSE button to open the CD door, insert a CD or CD-R/RW disc into the CD Drive and press the OPEN/CLOSE button to close the CD door. 4. Press the PLAY/PAUSE button to play or pause the loaded CD. 5. Press the FWD/PEV buttons to skip tracks, press and hold the FWD/PEV buttons to search through individual tracks. 6.
OPERATION Saving and Recall a Radio Station Memory 1. In radio mode, you select the radio station to storage in memory. 2. Press and hold the MEM button to begin saving the current radio station. 3. Press the FWD/PEV buttons to select a memory slot for the current radio station(P01~P10). 4. Press the MEM button to confirm the selected memory slot. 5. Press the PLAY/PAUSE/MEM-UP button and REPEAT/MEM-DN button to cycle through the saved radio stations. Using the Auxiliary Input 1.
Care and Maintenance Caring for Compact Discs a. Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. b. Do not attach adhesive tape, stickers, etc. to the disc label. c. Clean the discs periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
Specifications Power Requirement AC ADAPTOR INPUT: 230VAC 50Hz 0.3A OUTPUT: 10VAC 1500mA CLOCK BACK UP BATTERIES: DC 3V (2 x AAA SIZE) Frequency Range Radio Receiving: AM 522 - 1620 KHz FM 87.
LIMITED PRODUCT WARRANTY Audio Product / Telecom Product / TV / DVD Product This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should any problems arise with this product, it is highly recommended to visit our website at www.curtisint.
