MODEL NO.
SAFETY PRECAUTIONS R CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PREPARATION FOR USE Unpacking and Setup Carefully remove the unit from the display carton and remove all packing material from the unit itself. AC Operation Unwind the AC cord and extend it to its full length. Insert the AC cord into any convenient AC 120V~60Hz household outlet.
L OC A T ION OF C ONT R OL S 18 IR 17 16 15 14 13 FM MHz J AZZ SLEEP TIMER 1 2 3 4 5 7 6 8 9 21 10 19 20 1. POWER BUTTON 11. VOL UP BUTTON 2. SLEEP BUTTON 12. VOL DN BUTTON 3. TIMER BUTTON 13. OPEN/CLOSE BUTTON 4. FUNCTION BUTTON 14. BAND BUTTON 5. REMOTE SENSOR 15. PLAY/PAUSE BUTTON 6. MEM/CLK SET BUTTON 16. EQ BUTTON 7. MEM DN BUTTON 17. MEM UP BUTTON 8. REPEAT BUTTON 18. CD DOOR 9. SKIP/TUNE DN BUTTON 19. DISPLAY BUTTON 10. SKIP/TUNE UP BUTTON 20. FM ST BUTTON 21.
L OC A T ION OF R E MOT E C ONT R OL S 20 19 1 2 18 FUNC DSIPLAY TIMER SLEEP 1 2 3 4 5 6 7 8 9 -/-- 0 MUTE 17 16 VOL. 3 TUNER/SKIP/CH 4 5 EQ ITEM/ ENTER MENU PLAY/PAUSE/M-UP STOP/BAND 15 14 13 12 11 OPEN/CLOSE FM ST MEM-DN MEM/CLK REP SET REMOTE CONTROL 6 7 10 89 1. FUNCTION BUTTON 11. STOP/BAND BUTTON 2. DISPLAY BUTTON 12. MENU BUTTON 3. NUMBERDIAL BUTTONS 13. ITEM/ENTER BUTTON 4. SKIP/TUNE DN BUTTON 14. EQ BUTTON 5. OPEN/CLOSE BUTTON 15.
P OWE R S OUR C E S (F OR R E MOT E C ONT R OL) BATTERIES NOTE: The button cell battery contains mercury, don't put in the trash. Recycle or dispose as hazardous waste. NOTE: You may need to remove a protective covering from the remote's battery compartment before using the remote control.
OP E R A T ING INS T R UC T IONS Setting up your radio For instructions on mounting your radio, see the mounting template that came with your radio. Checking AM Radio reception Your clock radio has a built-in antenna for AM radio. To improve reception, you need to rotate your clock radio. Before you mount your clock radio under a counter, tune to an AM station and rotate your clock radio until you get the best reception. This is the orientation you need to use when you mount your clock radio.
OP E R A T ING INS T R UC T IONS Using your radio To turn on your radio: 1. Plug the AC Power cord into a power outlet. 2. Press the POWER button to turn on the radio. Setting the time To set the time on your radio: 1. 2. 3. 4. 5. 6. With the power off. Press and hold the MEM/CLK SET Button; "12Hr" will blink. Press the SKIP/TUNING Button to set the unit to the 24 hour (24Hr) mode or 12 hour (12Hr) mode. Press the MEM/CLK SET Button and the hours will blink.
OP E R A T ING INS T R UC T IONS To listen to your radio: 1. 2. 3. 4. 5. Press the POWER Button to turn on your radio. Press the FUNCTION Button one or more times until TUNER appears on the display. Press the BAND Button to select AM or FM. Press and hold one of the SKIP/TUNING Buttons to go to an available radio station. Press one of the VOLUME Buttons to adjust the volume. Improving reception: Your clock radio has an FM antenna on the back.
OP E R A T ING INS T R UC T IONS To tune to a radio station preset: 1. 2. 3. 4. Press the POWER Button to turn on your radio. Press the FUNCTION button one or more times until TUNER appears on the display. Press the BAND Button to select AM or FM. Press the MEM DN or MEM UP Button one or more times until the preset number you want appears on the display.
OP E R A T ING INS T R UC T IONS To set up a CD playlist: 1. 2. 3. 4. 5. 6. 7. 8. Press the POWER Button to turn on your radio, then Press the FUNCTION Button one or more times until "--" appears on the display. Insert a CD into the CD tray. If the CD starts playing, press the STOP Button. Press the MEM/CLK SET Button. "PROG 0" appears on the display. Press one of the SKIP/TUNING Buttons one or more times to select the first track you want to program. Press the MEM/CLK SET Button to confirm your selection.
OP E R A T ING INS T R UC T IONS 6. If you want to repeat a single track, press one of the SKIP/TUNING Buttons one or more times to find the track you want to repeat, then press the REPEAT button once. OR 7. If you want to repeat the entire CD, press the REPEAT Button twice. To cancel repeat mode, press the REPEAT Button again. To connect an external audio input device: 1. 2. 3. 4. 5. 6. Make sure that your radio is turned off and unplugged from the power outlet.
OP E R A T ING INS T R UC T IONS To clean the lens * If the lens get dirty, your player may skip or may not play a CD 1. 2. 3. Open the CD tray. Use a camera lens blower/brush to blow on the lens once or twice, brush the dust or particles off the lens, then blow again. To remove fingerprints, use a dry cotton swab to wipe from the middle to outer edge of the lens.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION GENERAL No sound is heard. No sound is heard. Power is not on. Press the POWER button. VOLUME Control is set to minimum. Adjust the VOLUME Control. Mute is on. Press Mute on remote. RADIO Station has not been tuned properly. Tune station properly . FM reception is weak. Extend the FM cord. Wrong function is selected. Press the FUNCTION button to the radio position. CD All or part of the CD will not play. CD is inserted incorrectly.