MODEL NO.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PREPARATION FOR USE Unpacking and Setup • Carefully remove the unit from the display carton and remove all packing material from the unit itself. AC Operation Unwind the AC cord and extend it to its full length. Insert the AC cord into any convenient AC 120V~60Hz household outlet.
LOCATION OF CONTROLS 4 14 13 6 5 7 8 16 12 10 9 15 2 3 11 1 1. TIMER BUTTON 9. 2. MEM UP BUTTON 10. ITEM BUTTON 3. MEM DN BUTTON 11. CH. DN BUTTON 4. TUNER/CLK BUTTON 12. EQ BUTTON 5. MOUNTING BRACKET 13. BAND BUTTON 6. FUNCTION BUTTON 14. SLEEP BUTTON 7. CH. UP BUTTON 15. MEM/CLK SET BUTTON 8. VOLUME BUTTON 16.
LOCATION OF CONTROLS 1 15 2 14 3 13 12 4 11 5 10 6 7 9 8 1. MEM. CH. UP/DN BUTTON 9. 2. FUNCTION BUTTON 10. TFT ON/OFF BUTTON 3. NUMBERDIAL BUTTONS 11. BAND BUTTON 4. DISPLAY BUTTON 12. EQ BUTTON 5. ITEM/ENTER BUTTON 13. VOLUME BUTTON 6. TIMER BUTTON 14. MUTE BUTTON 7. MEM/CLK SET BUTTON 15. POWER BUTTON 8.
POWER SOURCES (FOR REMOTE CONTROL) BATTERIES NOTE: The button cell battery contains mercury, don’t put in the trash. Recycle or dispose as hazardous waste. NOTE: You may need to remove a protective covering from the remote’s battery compartment before using the remote control.
OPERATING INSTRUCTIONS 1. SETTING THE TIME (POWER OFF MODE) MEM/CLK SET PRESS AND HOLD TUNING TUNING MEM/CLK SET TO SELECT 24 HR OR 12 HR MEM/CLK SET TUNING MEM/CLK SET TO ADJUST MINUTE 2.
OPERATING INSTRUCTIONS PROGRAM RADIO STATIONS MEM/CLK SET TUNING PRESS AND HOLD TUNING MEM/CLK SET 3.
OPERATING INSTRUCTIONS 4.
OPERATING INSTRUCTIONS HUE ENTER PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT ENTER DISPLAY MODE ENTER PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT ENTER 5 RESET TO DEFAULT SETTING ENTER PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT ENTER 6 PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE RESETING PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR HUE DISPLAY MODE DEFAULT EXIT PICTURE MENU ENTER TUNING CHANNEL ENTER T
OPERATING INSTRUCTIONS TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP TV MODE (AIR/CABLE) ENTER ENTER TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP CABLE TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP FINE TUNE ENTER ENTER CABLE PLEASE INPUT 0 OR 1 MANUAL TUNE ENTER TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN CHANNEL SWAP ENTER CABLE PLEASE INPUT 0 OR 1 AUTO SCAN TUNING CHANNEL TV MODE FINE TUNE MANUAL TUNE AUTO SCAN
OPERATING INSTRUCTIONS 5. LISTENING TO AN AUXILIARY SOURCE FROM VIDEO OUTPUT FROM LEFT AUDIO OUTPUT FROM RIGHT AUDIO OUTPUT TV, VCR, STEREO, VIDEO GAME SYSTEM, ETC. 6. SETTING KITCHEN TIMER HOLD TIMER BUTTON TO SHUT OFF TIMER 7.
CARE AND MAINTENANCE GENERAL * Use a soft, clean cloth moistened with plain, luke-warm wafer to clean the exterior of the unit. * Never use solvents such as benzene or other strong chemical cleaners since these could damage the unit’s finish. * It is important that no liquid reaches the inside of the unit.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION GENERAL No sound is heard. No sound is heard. Snowy picture; noisy sound. Power is not on. Press the POWER button. VOLUME Control is set to minimum. Adjust the VOLUME Control. Mute is on. Press Mute on remote. RADIO Station has not been tuned properly. Tune station properly . FM reception is weak. Extend the FM cord. Wrong function is selected. Press the FUNCTION button to the radio position. TV Station has not been tuned properly.
