Contents 1. Appearance………………………………………………………………………2 2. Getting started……………………………………………………………………2 3. Inputting…………………………………………………………………………9 4. Desktop …………………………………………………………………………10 5. Browsing web pages……………………………………………………………17 6. Typical applications……………………………………………………………18 7. Tips and other information……………………………………………………27 8. Customized settings……………………………………………………………30 9. Using HDMI……………………………………………………………………42 10. Locking the device……………………………………………………………43 11.
1.Appearance Production structure: 2. Getting started Note: Our Company spares no efforts to improve the product quality. Therefore, if there is any difference between the delivered product and the contents of the User’s Guide because of the upgrading of the software, the former shall prevail. Thank you for your understanding in this respect! 2.
power is low. Power adapter: To charge the battery, insert one end adapter into the outlet and the other end into the power jack on the device. 1. After the adapter is inserted, the battery indicator will turn red, which means the charging is in process. When the battery is fully charged, the related indicator will be turned off. 2. You can also use the handheld PC when the battery in it is being charged. Note: It takes longer to charge the battery fully when the PC with the battery is powered on. 2.
Removing the SD card: First close all files already opened from the card. Then click the menu, and select Setup →SD card’s memory→SD card 1→Uninstall SD card. At the time, the system indicates that “the SD card has been safely removed”. After that, press the card gently to allow it to project one part of it, and hold that part to pull out the whole card. Then the screen will indicate that “SD card was removed.” Note: 1. Insert the SD card properly. Otherwise, it may damage the card. 2.
memory then they need to save it first onto an sd card and then it can be saved to the local memory. 2.3 Hot plug of SD card and external flash disk Do not hot plug the SD card and external flash disk when they are being used or their contents are browsed. If, in such software as My Video, My Music and My Photo, the files in the SD card and external flash disk are being used or browsed, and the card or the disk is pulled out directly, it may damage them, and the program may exits for self protection.
1. Power on: When the battery can provide sufficient power, you can press the key Power and hold on for two seconds to power on the device. At the time, the device may vibrate. After the power-on process, the system will enter the screen-locking interface. You can slide rightward the unlocking icon to enter the main interface. 2. Power off: First press and hold the key Power for 4 seconds, and the system will pop up the interface for power-off confirmation.
shortcut bar, and select settings for the voice and display mode. Then select the check box behind the “Haptic feedback” and the vibration function is disabled. 2.7 Turning interface The interface can be turned at times when the direction of the device changes. When you hold the device in a vertical way, the interface will show the contents in a vertical way too. When horizontal, the interface stands horizontal too. The screen can turn within two seconds and restore the previous state after refreshing. 2.
screen. Then the device will obtain the IP address automatically to access to the network. Network access can also be realized through manual setups. Wireless network: 1.Move leftward the WI-FI switch at the upper right part of the device to be in the ON state; 2.Select the icon “setup” under the shortcut bar on the desktop; 3.Select “wireless network” in the setup menu; 4.Open WI-FI through the check box behind it; 5.Select “WI-FI setup” to set the WI-FI network; 6.
3. Inputting 3.1 Keyboard When you need to input the programs or files made up of texts and digits, the touch keyboard will appear on the screen. Note: The device is compatible with USB keyboard. However, a USB keyboard is connected to the device, some keys may become ineffective. 3.
4. Desktop 4.1 Status bar At the upmost part of the screen is the status bar, at the left of which is one software button and right are five. The buttons are defined as Home, Prt Sc, Vol- and Vol +, Menu AND Back. A the status bar other information is also indicated, such as the strength of 3G and of WI-FI signals, the state of Ethernet and battery and the time. 4.2 Home page The home page of MID Flat Handheld PC consists of two modes: Gadget Mode and Icon Mode.
To enter the interface of application icons, click the button bar, as shown below: 11 at the shortcut
To enter the interface of Gadget Mode, click . 4.3 Shortcut mode In the major interface of the Gadget Mode, you can press the menu button or click the icon Menu at the status bar.
4.4 Shortcut way to add gadgets 1. Shortcut mode To add a shortcut mode of an application to the desktop, press Menu→Add widget→Shortcut in the Gadget mode interface. Once added, you can click the shortcut icon to perform the related operations.
2. Wallpaper To add the widgets to the major screen, press button→ →Wallpaper→Wallpaper gallery.. You can select your favorite wallpaper or capture your favorite picture as the desktop background.
3.Alarm Clock: Click on the menu to add a clock, hide the clock display the clock.
4.5 Using gadgets The user can add, delete and install the gadgets, add and delete application icons, and move the icons. You can also drag the icons between the operation areas or between operation area and shortcut bar. In the desktop gadget interface, long press the gadget icon, and a small square graphic and a recycling bin icon at the middle of the shortcut bar will be popped up. Drag the recycling bin icon to any place on the desktop, or drag it to the recycling bin to delete it. 5.
Note: The Location function allows google applications such as google maps and google latitude to find users location to provide location based services. User can turn off this function by deactivating the "use my location" in the privacy settings menu via "settings" and "privacy" .This is not a GPS device). 6. Typical applications 6.1 Email Click the email icon , you can enter the email interface, where you can perform the operations below: 1.
2. Write new emails; 3. Send and receive the emails; 4. Download or print the attachments. 5. To the extended menu, under "account" and “menu”, select the “account settings” option and you can remove the selected account. 6. Note: (1) The user can check their emails in two ways, either by visiting a web mail web site or by accessing the Mail Application. The unit Mail Application is preloaded with G-mail which if activated will keep users permanently logged in as soon as devide is turned on.
After you run the file manager My Pad, you can carry out such operations to the files in the Local, SD1, SD2 and flash disk as copying, cutting, pasting, creating a new file, renaming and deleting. Installing files If you want to install the files in the explorer, you only need to click the installation files with an extension name “APK”. At the time, a prompt window will be popped up, and then you can select Install to install the fife into the device. 6.
below: 1. Click the menu button to pop up the shortcut menu, where such items as All Pictures, Multi-Option and Camera Settings are available.
2. Click All Pictures, and system will enter the slide playing mode. 3.
4. Click the thumbnail at the picture library interface, and you can view the picture in full screen. Click the screen, and the zoom-in and zoom-out items will be popped up, where you can perform the related operations. Press the menu button, and the system will pop up the shortcut menu, where you can realize such operations as sharing picture, deleting picture and cropping, setting as wallpaper and clicking icon of contact people.
Note: The SHARE function only operates when you are logged into you Google account, via Google pictures. 6.5 Music Click the icon to enter the music mode.
To enter the playing interface, click the song.
1. Click to enter the mode of Party Shuffle; 2. Click to switch over between Play All mode and Play Single mode; 6.6 Camera Click to enter the mode for shooting pictures. To operate the device in this application: 1. Click the icon at the lower right angle to shoot the picture. You can save the picture to DCIM/CAMERA under SD root directory.
2. Move the slide block on the icon at the right, and you can change the shoot mode to video mode. 3. Click the icon on the upper right angle to view the previous picture, where you can for the picture perform such operations as deletion, sharing and setting as wallpaper or as contact person icon. Click Finish to return to the shooting interface. 4. Move the left icon rightward, and you can set such items as storage place, picture size and picture quality for the camera. 7.
7.2 Setting for shortcut operations 7.2.
7.2.2 Access to Internet Click the internet access icon to access to the Internet.
7.2.3Access to the Internet in 3G mode As our company spares no efforts to improve the product quality, the software contained in the products is being upgraded continuously, which may be compatible with more models. At any rate, the delivered product shall prevail. To access to the Internet in 3G mode, you must buy card with models mentioned above. To do that, you can place the card you bought into the 3G network adapter, and insert the adapter into the USB port of the device.
To customize the settings, click on the shortcut menu. 8.1 Wireless operation and network To turn on or off WIFI, you can set the WIFI switch on the upper angle of the device as ON or OFF when the WIFI items are properly configured. Access to the Internet in a wireless way If you want to set and manage connection point designed for the wireless access to the Internet, please press Menu→System Settings→Wireless Network→WIFI setting. For details, please refer to the section “7.2.
Mute mode To set the system to a mute, except for medium and alarm clock, you can press Menu→System Settings→Voice and Display (voice setting)→Mute.
To set the volume for the music and video, you can press Menu→System Settings→Voice and Display (voice setting)→Medium Volume. Selecting the operation ringing If you desire that there is a sound when a selection is made through the screen, you can press Menu→System Settings→Voice and Display (voice setting) Tactile Feedback. If you want to use the soft key and use some UI interacted vibrations, you can press Menu→System Settings→Voice and Display (voice setting)→Tactile Feedback.
To adjust the brightness of the screen, press Menu→System Settings→Voice and Display (voice setting)→Brightness. Standby mode To adjust the delayed time for screen locking, press Menu→System Settings→Voice and Display (voice setting)→Standby Mode. 8.4 Position and safety Setup for safety and the password Using the wireless network To use the wireless network to view the position in some app (like Google Map), you can press Menu-Setup-Position and Safety-Using Wireless Network.
Password To display the characters of the password when it is entered, press Menu→SystemSettings→Positin and Safety→Password Display. Saving credentials 8.5 Application Unknown resources Select this item to permit that application provided by the unauthorized electronic market can be installed Management for application To manage or delete the installed application, press Menu→System Settings→Application→Management.
Memory devices (SD card and flash disk) To view or perform operations for the memory devices, such as uninstalling, press Menu→System Settings→SD card and system memory.
device under the related root directory, like SD card 1. After you enter the interface of the memory device, you can view the total capacity and the remaining capacity, or you can uninstall it. The interface is shown below. Note: To record and download data from the network, you can only use SD1. System memory To view the system memory, press Menu→System Settings→SD Card and System Memory. Under its root directory, you can view the system memory.
8.7 OSD Language and keyboard In this item, you can set the OSD language and region、character entering and automatic correction. Select OSD language and region To select the OSD language and region, press Menu→System Settings→OSD language and keyboard→Select OSD language.
To set the Google Pinyin input mode, you can press Menu-System Settings-OSD Language and Keyboard-Google Pinyin input mode. Android keyboard To set Android keyboard, press Menu→System Settings→OSD language and keyboard→Android keyboard. User-defined dictionary To add words into or delete words from the user-defined dictionary, press Menu→System Settings→OSD language and keyboard→User-defined dictionary. 8.
8.9 Screen calibration To calibrate the screen, press Menu→System Settings→Screen calibration. Then calibrate the touch screen by following the prompts. After that, the system will prompt you to return to the settings list.
8.10 About the device In this item, you can view the information on law, device status and software version.
Status To view the status of the battery, power-on time and WIFI address, press Menu→System Settings→About the device→Status. Information on law To view the information on law, press Menu→System Settings→About the device→Information on law. Model To view the mode, press Menu→System Settings→About the device→Model. Firmware version To view the firmware version, press Menu→System Settings→About the device→Firmware version. Version No. To view the version No.
At the time, on the status bar messages about HDMI connection will be popped up. 3. Play the video files on the flat handheld PC. 4. Press MENU, and the PC’s screen will turn black, a process lasting about 5 seconds during which the contents are being switched to HDMI monitor. You may wait with patience. 5. You can transfer the contents to the PC again by any of the four ways below: 1) System transfers to PC automatically after the playing is completed.
many applications that have been turned on, it will slow down the running speed of the device. Therefore, you should timely close those applications not being used, so that more space can be saved and the device can run faster.
Click the application to be closed, and the system will pop up a window which asks you whether you need to stop the service window, as shown below: 45
Click Stop, and the application will be closed and disappear within the window being used. 11.2 Compulsory power-off 1.
off in a compulsory way. 2. Press Rest at the right lower part of the device, the device will be powered off in a compulsory way. 11.3 Restore defaults If you want to restore the factory defaults and delete all other data, please press Menu→System Settings→Privacy→Defaults Warning: Once you select Reset, the Google account, data and settings of the system and application and the downloaded applications will be deleted. Thus, be careful when using this function. 12. Specifications 1). Processor: iMAPX220,1.
12). HDMI: Mini HDMI port 13). 24pin Docking: 1x 14). Mic. Jack: 1x 15). Micro SD: 2x , max up to 32GB 16). Battery: 2650mah*2 17). Dimension: 213*161*10mm 18). N.W.: 507g 13. Accessories include: 1). Stylus 2). AC adaptor 3). Earphone 4).
14. FCC STATEMENT FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.