INSTRUCTION MANUAL Before using the TV, please read this manual thoroughly, and retain it for future reference.
CONTENTS 1 SAFETY PRECAUTION 1 2 IMPORTANT SAFETY INSTRUCTION 2 3 MAINTENANCE 2 4 ACCESSORIES 3 5 GETTING STARTED 3 6 CONTROL REFERENCE GUIDE Remote Control Front Frame Back Frame Side Panel 7 CONNECTIONS Antenna Connection S-Video Connection AV Connection Y Pb Pr Connection HDMI Connection VGA Connection Headphone Connection Power Cord Connection 8 WALL MOUNT INSTALLATION 9 INITIAL SETUP Putting The Unit On A Proper Place Source Selection Turning The Unit On For The First Time 12
CONTENTS 11 DISC FORMATS 12 CD / DVD OPERATION Basic Operations Special Functions Mp3 / JPEG Playback 28 31 33 13 CUSTOMIZING THE DVD FUNCTION SETTINGS DVD Function General Setup System Setup Language Setup Audio Setup Digital Setup 34 34 36 38 39 14 DISPLAY MODE PC Formats Video Formats 40 41 15 SPECIFICATION 16 TROUBLESHOOTING GUIDE 27 42 DVD Symptom TV Symptom 43 44 SAFETY CLASS :This is an IEC safety class I product and it must be grounded for safety.
SAFETY PRECAUTION * CAUTION MARKING WAS LOCATED AT BOTTOM PLACEMENT INFORMATION ENCLOSURE OF THE APPARATUS. • Do not use this unit in places that are extremely hot, cold, dusty or humid. • Do not restrict the airflow of this unit by placing it somewhere with poor airflow, by covering it with a cloth, by placing it on bedding or carpeting. SAFETY INFORMATION WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dr y cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
ACCESSORIES Please check and identify the supplied accessories. Remote control ...................................................................................................... ................... . x 1 Batter y（AA） ............................................................................................................ . ............. .. . x 2 Power Cord ............................................................................................................................ . . . .
CONTROL REFERENCE GUIDE TV FUNCTION BUTTONS REMOTE CONTROL DISPLAY DISPLAY 4 4 7 0 2 3 5 6 8 9 RECALL/-/-- MUTE MUTE 8 8 9 9 MTS SUB. GUIDE FAV+ ANGLE ? SLOW FAVAUDIO 17 EXIT D.SETUP D.SETUP 18 ZOOM CCD ZOOM EPG 19 A -B 20 REPEAT PROG 13 MENU ANGLE 16 6 13 12 CHCH- CH.LIST PROG 7 SLEEP CH+ CH+ 0 VOLVOL- 14 15 7 10 VOL+ VOL+ LANG FAV 3 S.MODE SMODE ENTER 11 3 P.MODE PMODE 5 11 2 TV/AV TV/AV 1 1 2 A-B INTRO SUBTITLE TITLE D.DISP GOTO D.
CONTROL REFERENCE GUIDE DVD FUNCTION BUTTONS REMOTE CONTROL 2 DISPLAY DISPLAY TV/AV TV/AV 3 1 4 7 0 21 2 3 5 6 8 9 MUTE MUTE RECALL/-/-- P.MODE PMODE 7 S.MODE SMODE 8 SLEEP 9 MTS 22 VOL+ VOL+ CH+ CH+ 0 ENTER CHCH- VOLVOL- 29 LANG FAV SUB. GUIDE 23 ? CH.LIST 25 33 MENU ANGLE 24 26 27 28 FAV+ ANGLE SLOW FAVAUDIO PROG D.LANG PROG INTRO EXIT D.SETUP D.SETUP ZOOM CCD ZOOM EPG REPEAT A-B A-B SUBTITLE TITLE D.DISP GOTO D.MENU TITLE D.
CONTROL REFERENCE GUIDE FRONT VIEW 1. Color LCD Screen 2 . Remote Sensor Do not block this sensor or the remote control will not work . 3. Standby Indicator Indicates whether the unit is ON or in STANDBY (OFF) mode. Light in red : The unit is in STANDBY. Light in green : The unit is turned ON. 4 . Speakers 14 2 3 4 BACK VIEW 1 . TV ANTENNA Terminal 2 . HEAD PHONE Jack 3. AUDIO IN Jack (Right) 4. AUDIO IN Jack (Left) 5. VIDEO IN Jack 6. S-VIDEO Jack 7. Y / PB / PR Jacks 8 . PC AUDIO IN Jack 9.
CONTROL REFERENCE GUIDE SIDE VIEW 1 TV / AV LABEL S IDE 1 MIRROR S IDE 2 Menu P P 5 6 V 7 8 Power 9 V 1. Disc Door Insert discs to disc door 3 4 1. Button Press to eject a disc. 2. Button Note: When inserting a disc, please Press to start or resume playback of a disc . take note of the indication of direction 3. TV / AV Button around the disc door for operation. Select A TV, AV, S-VIDEO , YPbPr, HDMI, (right direction: put the label side of PC, or DVD. the disc against yourself ) 4.
CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system NOTE For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporar y antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas.
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION High-Definition (HD) Devices with component video output must be connected to the Y PbPr input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment ( COMPONENT OUT and AUDIO OUT ) to this unit ( COMPONENT IN and AUDIO I N ).
CONNECTIONS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown. CONNECTING HEADPHONES • Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. • When headphones are Make sure you connect the cable from the computer connected, no sound will come from the front speakers.
WALL MOUNT INSTALLATION INSTALLING / REMOVING THE BASE STAND WARNING : The LCD Display is ver y fragile , and must be protected at all times when removing the base stand . Be sure that no hard or sharp object , or anything that could scratch or damage the LCD display , comes into contact with it . Do NOT exert pressure on the front of the unit at any time because the screen could crack . 1 . Disconnect all cables or cords connected to the unit . 2 .
INITIAL SETUP PUTTING THE UNIT ON A PROPER PLACE When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit. SOURCE SELECTION INPUT SO URCE 1. Press the TV /AV button on the remote control. 2.
INITIAL SETUP How to Navigate Air Mode: Select AIR when connected to an indoor/outdoor antenna. Cable Mode: Select CABLE if you subscribe to a pay television service includ ing satellite. 12 12 6 6 Picture Audio Time Setup Parental Picture TV Auto Scan Auto Scan Favorite Favorite Show Hide Show Hide KOCE LB Channel label TV DTV Signal Move Select MENU Move Exit • Using the button to highlight AIR .
TV SETUP Picture PICTURE MENU The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal prefer ences. Adjustment options include contrast, brightness, color, sharpness and color temperature. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select PICTURE .
TV SETUP Picture PICTURE MENU The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal prefer ences. Adjustment options include contrast, brightness, color, sharpness and color temperature. How to Navigate: Press the MENU button on the remote control. Navigate using the 12 12 6 Picture Audio buttons to select PICTURE .
TV SETUP Audio AUDIO MENU The AUDIO menu offers options to make sound enhancements while listening through the built-in speakers and personal preferences. Adjustment options include bass, treble, balance, surround , AVC and audio language. . How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select AUDIO .
TV SETUP Audio AUDIO MENU The AUDIO menu offers options to make sound enhancements while listening through the built-in speakers and personal preferences. Adjustment options include bass, treble, balance, surround , AVC and audio language. . How to Navigate: Press the MENU button on the remote control. Navigate using the 12 12 6 6 Picture Audio Time Setup Parental Picture TV Audio Time Setup Parental TV Standard Sound Mode Standard Sound Mode buttons to select AUDIO .
TV SETUP 12 6 TIME MENU Time The TIME menu includes adjustment of settings for your local time zone and daylight savings time. The clock will adjust automatically after the initial Channel Auto Scan of available broadcast channels in your area. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select TIME .
TV SETUP Setup SETUP MENU In the SETUP menu you may change the initial set up of preferences that include settings for language, menu display, computer monitoring, closed captions, enhancement of black detail in the picture and resetting your TV back to its factory default status. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select SETUP .
TV SETUP Setup SETUP MENU The SETUP menu includes adjustments for activating the Closed Caption feature for display on the television and customizing CC display types and font styles.
TV SETUP Setup SETUP MENU In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC. Recom mended resolution is 1366 x 768. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable for stereo sound. How to Navigate: After connecting to a PC , press the INPUT button and highlight VGA , then press the ENTER button.
TV SETUP Lock PARENTAL MENU In the PARENTAL menu you may block television by inputting passwords. To gain access and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select Parental .
TV SETUP PARENTAL MENU Lock In the PARENTAL menu you may block television and movie programming based on U.S TV and movie rating guidelines. To gain ac cess and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select Parental . Press the button to highlight ENTER PASSWORD . Enter your 4 digit code (factory default code is "0000") unless previously changed.
TV SETUP Lock PARENTAL MENU In the PARENTAL menu you may block television and movie programming based on Canadian TV and movie rating guidelines. To gain ac cess and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using the buttons to select Parental . Press the button to highlight ENTER PASSWORD . Enter your 4 digit code (factory default code is "0000") unless previously changed.
TV SETUP TV MENU Channel The TV menu provides for the setup of your television to receive TV channels, store your favorites, add or skip channels and label them by their call letters. How to Navigate: Press the MENU button on the remote control. Navigate using the Press the button to highlight your preferences. 12 12 6 6 Picture Audio buttons to select TV .
TV SETUP ZOOM MODE AUDIO ZOOM The ZOOM function offers several viewing display options on the 16:9 screen. Press ZOOM to cycle through the following widescreen settings. 1. NORMAL Recommended for viewing native widescreen content and undistorted 4:3 images. (With Black Bars) 2. WIDE Stretches certain 4:3 content and may reduce the black bars. 3. ZOOM Stretches the image both vertically and horizontally to fill the screen when viewing widescreen content. The zoom effect will crop images somewhat. 4.
DISC FORMATS ICONS USED ON DVDs NOTES ON COPYRIGHT It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936 licensed for limited viewing uses only. DVDs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.
CD/DVD OPERATION This owner’s manual explains the basic instructions of this unit. Some DVDs are produced with limited operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc.
CD/DVD OPERATION VOLUME • Press the VOL - / VOL + buttons to adjust the output volume. NOTE: Playback DVD discs in original code, is not adjustable. MUTE • Press the MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”. • Press again to cancel, or Press the VOL + button to cancel and adjust the volume. • In case there is no audio output, tr y to press the MUTE button to cancel mute. ZOOM • Press the ZOOM button to zoom in the picture.
CD/DVD OPERATION FAST FORWARD / FAST REVERSE 1.Press the or button when a disc is playing. Each time the or button is pressed, the speed of fast scan changes in the following sequence: FORWARD X 2 ---> FORWARD X 4 ---> FORWARD X 8 ---> FORWARD X 20 ---> PLAY BACKWARD X 2 ---> BACKWARD X 4 ---> BACKWARD X 8 ---> BACKWARD X 20 ---> PLAY 2. Press the button to play when you reach the desired point to resume playback at normal speed . SLOW - MOTION PLAY ( DVD ) 1.
CD/DVD OPERATION SPECIAL FUNCTIONS DISPLAY function (DVD) Using D. DISP , you can check the current settings of the following items: ANGLE, AUDIO and SUBTITLE. While the disc is playing , press the D .DISPLAY button repeatedly to display information on operation status . LOCATING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting a title number. 1. Press the GOTO button. 2.
CD/DVD OPERATION DVD REPEATING You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) REPEATING A CHAPTER You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT button until the on the screen. The current chapter is played repeatedly. REPEATING A TITLE You can play the same title repeatedly. 2. While the disc is playing, press the REPEAT button until the The current title is played repeatedly. TO RESUME NORMAL PLAYBACK 3.
CD/DVD OPERATION MP3/JPEG PLAYBACK After loading the MP3 / JPEG disc, it wil start to scan for the stored MP3 /JPEG folders. Then will firstly display the MP3 contents automatically and start to play the first file (highlighted file). Screen as follow: MP3 MP3 01 MP3 01 02 03 04 05 06 07 08 09 10 Display current MP3 playback function PICTURE 01 PICTURE Display current Picture playback function Highlight file for current playback. Buttons for switching between MP3 and JPEG playback function.
CUSTOMIZING THE DVD FUNCTION SETTINGS DVD Function General setup DVD SETUP MENU is only available in DVD mode. So before starting to set up please make sure the unit is switched to the DVD mode. Press the TV/AV button and use ▲ or ▼ button to highlight the DVD option, then press the Enter button to enter into the DVD mode.
CUSTOMIZING THE DVD FUNCTION SETTINGS 4:3PS (Normal) • When wide-screen video is played, this mode clips the right and left sides of the image so that it can be viewed on a conventional screen. • Some wide-screen DVDs that do not permit Pan Scan mode playback are automatically played in letterbox mode (black bands top and bottom). Cut off when a wide-screen video image is played.
CUSTOMIZING THE DVD FUNCTION SETTINGS DEFAULT SETTING SYSTEM SETUP Press the ENTER button to restore factory default. TV SYSTEM It takes 3 - 5 seconds to reset the DVD settings to TV TYPE the factor y default . PASS WORD RATING DEFAULT RESTORE EXIT SETUP LANGUAGE SETUP LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP LANGUAGE SETUP 1 . Press the D.SETUP button to activate the DVD player OSD menu. 2 .
CUSTOMIZING THE DVD FUNCTION SETTINGS AUDIO LANGUAGE LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN Use the navigation buttons to select the AUDIO LANG setup icon, press the ENTER button to confirm. There are 6 languages for you selection, press the ▲ and ▼ buttons to switch among different languages. ( ENGLISH / GERMAN / SPANISH / FRENCH / PORTUGUESE / ITALIAN ). EXIT SETUP Press the ENTER button to confirm.
CUSTOMIZING THE DVD FUNCTION SETTINGS AUDIO SETUP 1 . Press the D.SETUP button to activate the DVD player OSD menu. 2 . Use the ▲ or ▼ button to select the AUDIO SETUP menu , then press the ► button to enter the setting . 3 . Use the ▲ or ▼ button to select the options ( Audio Out , Tone, Exit Setup) , then press the ► button to enter into for detailed options and adjust them using the ▲ or ▼ buttons . 4 . Press the ◄ button to return to previous menu , repeat step 3 to adjust other settings . 5 .
CUSTOMIZING THE DVD FUNCTION SETTINGS DIGITAL SETUP Dolby Digital Setup 1 . Press the D.SETUP button to activate the DVD player OSD menu. 2 . Use the ▲ or ▼ button to select the DIGITAL SETUP menu , then press the ► button to enter the setting . 3 . Use the ▲ or ▼ button to select the options ( Dynamic Range , Dual Mono, Exit Setup) , then press the ► button to enter into for detailed options and adjust them using the ▲ or ▼ buttons . 4 .
DISPLAY MODE PC FORMATS Vertical Horizontal Resolution Scanning Frequency Scanning Frequency (KHz) 640 480 640 480 640 480 800 600 800 600 800 600 800 600 1024 768 1024 768 1024 768 1366 768 Format (Hz) 47.7 NOTE: This product does not support the display mode not listed above. In order to achieve the best display effect, please select the above-listed 11 display modes input signal.
DISPLAY MODE VIDEO FORMATS SUPPORTED COMPONENT / HDMI INPUT MODE Vertical Horizontal Resolution Scanning Frequency Scanning Frequency (KHz) (Hz) Format 720 480 31.47 59.94 480 i 720 480 15.734 59.94 480 p 720 p 1280 720 37.5 50 1280 720 45 60 720 p 1920 1080 31.25 50 1080 i 1920 1080 33.75 60 1080 i NOTE: The above listed formats are also related to the AV devices you are about to connect.
SPECIFICATION 19" LCD TV / DVD COMBO Model Description Panel Type Diagonal Size Screen Format Resolution Panel Brightness Contrast View Angle Response Time Maximum Color Color System Sound System Systems Audio System Sound Output RF Input HDMI Input PC-RGB Input Input/ Output Jacks S-Video Input Composite Video Input Component/Y Pb Pr Input Sound Input DVD Others L/R Speaker: 2W + 2W 75 ohm external terminal Video: 480i, 480p, 720p, 1080i Audio: Two channel linear PCM 32, 44.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Make sure the AC power cord is connected. • Turn on the unit. The remote does not function. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the batteries in the remote with new ones. DVD No sound or only a very low-level sound is heard. • Make sure that you’ve selected DVD mode. button to return to • The system is in pause mode.
TROUBLESHOOTING GUIDE CAUSE (AND REMEDY) SYMPTOM TV Bad Picture (snow, multiple images distortion,blurry) No sound. • • • • • Check the location of the antenna and adjust it if necessary. Make sure the antenna cable is firmly connected. Make sure all input cables are firmly connected. Increase the volume. Check whether the mute function has been activated on the Remote Control. Black and White picture. • Check the PICTURE setting within the PICTURE menu.
