INSTRUCTION MANUAL Before using the TV, please read this manual thoroughly, and retain it for future reference.
English CONTENTS 1 SAFETY PRECAUTION 1 2 IMPORTANT SAFETY INSTRUCTION 2 3 ACCESSORIES 3 4 GETTING STARTED 3 5 CONTROL REFERENCE GUIDE Remote Control Front Frame Back Frame Side Panel Antenna Connection S-VIDEO Connection AV Connection Y Pb Pr Connection HDMI Connection VGA Connection Power Cord Connection Coax(SPDIF) Connection 4 6 6 7 8 8 8 9 9 10 10 11 6 CONNECTIONS 7 WALL MOUNT INSTALLATION 8 INITIAL SETUP Putting The Unit On A Proper Place Source Selection Turning The Unit On Fo
CONTENTS 10 DISC FORMATS 11 CD / DVD OPERATION Basic Operations Special Functions Mp3 / JPEG Playback 29 32 34 12 CUSTOMIZING THE DVD FUNCTION SETTINGS DVD Menu 35 13 MAINTENANCE 14 DISPLAY MODE 15 SPECIFICATION 16 TROUBLESHOOTING GUIDE 28 37 PC Formats Video Formats 38 38 40 DVD Symptom TV Symptom 41 42 SAFETY CLASS :This is an IEC safety class I product and it must be grounded for safety.
SAFETY PRECAUTION * CAUTION MARKING WAS LOCATED AT BOTTOM PLACEMENT INFORMATION ENCLOSURE OF THE APPARATUS. • Do not use this unit in places that are extremely hot, cold, dusty or humid. • Do not restrict the airflow of this unit by placing it somewhere with poor airflow, by covering it with a cloth, by placing it on bedding or carpeting. SAFETY INFORMATION • When connecting or disconnecting the AC power WARNING:TO REDUCE THE RISK OF ELECTRIC cord, grip the plug and not the cord itself.
IMPORTANT SAFETY INSTRUCTIONS 1)Read these instructions. 2)Keep these instructions. 3)Heed all warnings. 4)Follow all instructions. 5)Do not use this apparatus near water. 6)Clean only with a dry cloth. 7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
ACCESSORIES Please check and identify the supplied accessories. Remote control ..................................................................................................................x 1 Battery(AA) ............................................................................................................ .........x 2 Warranty Card ................................................................................................................ x 1 Instruction Manual ..............................
CONTROL REFERENCE GUIDE REMOTE CONTROL 1.STANDBY To switch on the TV or make the TV into standby mode. 1 2 2.EJECT To eject a disc. 3 3.INFO Show the information of the program you are watching. 4 5 7 6 8 12 11 7.0-9 Allows you to change the channel of the TV. 13 15 16 14 19 18 17 20 21 23 22 27 26 24 FAV EPG 25 28 29 32 33 31 30 5.PMODE Press this button to select a picture mode for different picture qualities. 6.
CONTROL REFERENCE GUIDE REMOTE CONTROL 16.ENTER Press to confirm selections on a menu screen. 17.D.SETUP Press this button to show the DVD SETUP menu. 1 7 2 18.Play/Pause Press this button to play or pause the DVD you’re watching. 3 19.Exit Press this button to exit the on screen display. 4 Stop Press this button to stop playing the DVD you’re watching. 5 20.MUTE Press this button to mute or restore sound. 6 8 9 21.AUDIO Press this button to change the audio language of the DVD. 12 22.
6
CONTROL REFERENCE GUIDE SIDE VIEW 1 2. ▲ Button 1.Disc Door Insert discs to disc door Press to eject a disc. 3. ► Button Press to start pause or resume playback of a disc. 4. INPUT Button Press to select the input source of the TV . 5. Menu Button Press to display the on-screen TV menu. 6. VOL+ Button Press to adjust the volume up. 7. VOL- Button Press to adjust the volume down. 8. CH+ Button Press to change the TV channels and up highlight selections on the menu screen. 9.
CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system NOTE For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you require the use of a temporar y antenna, please ensure that you purchase an antenna with sufficient ability to receive in weak signal areas.
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION High-Definition (HD) Devices with component video output must be connected to the YPbPr input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment （COMPONENT OUT and AUDIO OUT）to the unit COMPONENT1 IN or COMPONENT2 IN.
CONNECTIONS CONNECTING A PC Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown. Make sure you connect the cable from the computer ( VGA and AUDIO - PC OUT ) to this unit ( VGA and AUDIO - PC IN ). TO AUDIO OUT jacks TO PC Connector CONNECTING THE POWER CORD You can power your TV unit by plugging the power cord into the AC socket on the side of the unit and into a wall AC power outlet.
CONNECTIONS Connection to a Home Theater Audio System How To Setup Digital Output Press the MENU button on the remote control Press the right ► a rrow button to select AUDIO Press the down ▼ a rrow button to highlight SPDIF type right ► R aw or PCM For BEST audio performance Connecting to a Home Theater System Dolby Digital can deliver optimal 2 channel stereo or surround sound with five discrete full range channels plus a sixth channel for a subwoofer.
WALL MOUNT INSTALLATION INSTALLING / REMOVING THE BASE STAND WARNING : The LCD D isplay i s v ery f ragile , and m ust b e p rotected a t a ll t imes w hen r emoving t he b ase Stand . Be sure that no hard or sharp object or anything that could scratch or damage the LCD display comes into contact with it . Do NOT exert pressure on the front of the unit at any time because the screen could crack . 1. Disconnect all cables or cords connected to the unit . 2 .
INITIAL SETUP PUTTING THE UNIT ON A PROPER PLACE When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit. TURNING THE UNIT ON FOR THE FIRST TIME After you have initially connected your TV antenna or cable, turn the television ON.
INITIAL SETUP How to Navigate Air Mode: Select AIR when connected to an indoor/outdoor antenna. Cable Mode: Select CABLE if you subscribe to a pay television service includ ing satellite. 12 12 6 6 Picture Audio Tim e Setup LOCK Picture CHANNEL Favorite Favorite Show Hide Show Hide Cable Channel No Channel No KOCE LB Channel label Channel label DTV Signal DTV Signal Move Select MENU Move Exit Select Tim e Exit 12 6 6 Audio MENU Using the ◄► b utton to highlight CABLE.
T V SETUP Pict ure PICTURE MENU The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal preferences. Adjustment options include contrast, brightness, color, tint, sharpness and Color Temp. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select PICTURE.
T V SETUP Pict ure PICTURE MENU The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal preferences. Adjustment options include contrast, brightness, color, tint, sharpness and color temp. Press the MENU button on the remote control. Navigate using the ◄► b uttons to select PICTURE.
T V SETUP Audio AUDIO MENU The AUDIO menu offers options to make sound enhancements while listening through the built-in speakers and personal preferences. Adjustment options include bass, treble, balance, surround, SPDIF Type and audio language. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select AUDIO.
T V SETUP Audio AUDIO MENU The AUDIO menu offers options to make sound enhancements while listening through the built-in speakers and personal preferences. Adjustment options include bass, treble, balance, surround ,SPDIF Type and audio language. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select AUDIO.
T V SETUP 12 6 Tim e TIME MENU The TIME menu includes adjustment of settings for your local time zone and daylight savings time. The clock will adjust automatically after the initial Channel Auto Scan of available broadcast channels in your area. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select TIME.
T V SETUP Setup SETUP MENU In the SETUP menu you may change the initial set up of preferences that include settings for language, menu display, computer monitoring, closed captions, enhancement of black detail in the picture and resetting your TV back to its factory default status. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select SETUP.
T V SETUP Setup SETUP MENU The SETUP menu includes adjustments for activating the Closed Caption feature for display on the television and customizing CC display types and font styles.
T V SETUP Setup SETUP MENU In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC. Recommended resolution is 1366 x 768. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable for stereo sound. How to Navigate: After connecting to a PC, press the SOURCE button and highlight VGA, then press the ENTER button.
T V SETUP Lock LOCK(PARENTAL) MENU In the LOCK(PARENTAL) menu you may block television by inputting passwords. To gain access and select your preferences within the LOCK(Parental) menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select Parental.
T V SETUP LOCK(PARENTAL) MENU Lock In the LOCK(PARENTAL) menu you may block television and movie programming based on U.S TV and movie rating guidelines. To gain ac cess and select your preferences within the LOCK(Parental) menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select LOCK (Parental). Press the ▼ b utton to highlight ENTER PASSWORD.
T V SETUP Lock LOCK(PARENTAL) MENU In the LOCK(PARENTAL) menu you may block television and movie programming based on Canadian TV and movie rating guidelines. To gain ac cess and select your preferences within the LOCK(Parental) menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using t he ◄► b uttons to select Parental. Press the button to highlight ENTER PASSWORD.
T V SETUP TV(CHANNEL) MENU Channel The TV(CHANNEL) menu provides for the setup of your television to receive TV channels, store your favorites, add or skip channels and label them by their call letters. How to Navigate: Press the MENU button on the remote control. Navigate using the ◄► b uttons to select TV. Press the ▼ b utton to highlight your preferences.
T V SETUP ZOOM MODE The ZOOM function offers several viewing display options on the 16:9 screen. Press ZOOM to cycle through the following widescreen settings. 1. NORMAL Recommended for viewing native widescreen content and undistorted 4:3 images. (With Black Bars) 2. WIDE Stretches certain 4:3 content and may reduce the black bars. 3. ZOOM Stretches the image both vertically and horizontally to fill the screen when viewing widescreen content. The zoom effect will crop images somewhat. 4.
DISC FORMATS ICONS USED ON DVDs NOTES ON COPYRIGHT It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public or rent copyrighted material without permission. Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132; and 5,583,936 licensed for limited viewing uses only. DVDs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.
CD / DVD OPERATION This owner's manual explains the basic instructions of this unit.Some DVDs are produced with limited operation during playback.For example,many DVDs do not allow users to skip government warnings,or in some cases previews or other features.This is not a defect in the unit. Refer to the instruction notes of discs. “ INVALID KEY ”may appear on the screen during operation. “ INVALID KEY ” means that the desired operation is not permitted by the unit or disc.
CD / DVD OPERATION VOLUME • Press the VOL - / VOL + buttons to adjust the output volume. NOTE: Playback DVD discs in original code, is not adjustable. MUTE • Press the MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”. • Press again to cancel, or Press the VOL + button to cancel and adjust the volume. • In case there is no audio output, try to press the MUTE button to cancel mute. ZOOM • Press the ZOOM button to zoom in the picture.
CD / DVD OPERATION FAST FORWARD / FAST REVERSE 1.Press the or button when a disc is playing. Each time the or button is pressed, the speed of fast scan changes in the following sequence: FORWARD X 2 ---> FORWARD X 4 ---> FORWARD X 8 ---> FORWARD X 20 ---> PLAY BACKWARD X 2 ---> BACKWARD X 4 ---> BACKWARD X 8 ---> BACKWARD X 20 ---> PLAY 2. Press the button to play when you reach the desired point to resume playback at normal speed . SUBTITLE SELECTION ( DVD ) 1.
CD / DVD OPERATION SPECIAL FUNCTIONS DISPLAY function (DVD) INFO Button Using INFO button, you can check the current settings of the following items: ANGLE, AUDIO and SUBTITLE. While the disc is playing, press the INFO button repeatedly to display information on operation status . LOCATING A SPECIFIC TITLE (DVD) If a DVD contains title numbers, you can locate a specific title by directly selecting a title number. 1. Press the GOTO button. 2.
CD / DVD OPERATION DVD REPEATING You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) REPEATING A CHAPTER You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT button until the on the screen. The current chapter is played repeatedly. REPEATING A TITLE You can play the same title repeatedly. 2. While the disc is playing, press the REPEAT button until the The current title is played repeatedly. TO RESUME NORMAL PLAYBACK 3.
CD / DVD OPERATION MP3/JPEG PLAYBACK After loading the MP3 / JPEG disc, it wil start to scan for the stored MP3 /JPEG folders. Then will firstly display the MP3 contents automatically and start to play the first file (highlighted file). Screen as follow: MP3 MP 3 01 MP3 01 02 03 04 05 06 07 08 09 10 Display current MP3 playback function PICTURE 0 1 PICTURE Display current Picture playback function Highlight file for current playback. Buttons for switching between MP3 and JPEG playback function.
CUSTOMIZING THE DVD FUNCTION SETTINGS Press the D.SETUP button and then press the ◄/► t o display the system setup menu page when in DVD mode. Press the ▲/▼ b utton to move the highlight to select the following option. Press the ► b utton to enter the following menu and use the ▲/▼ b utton to select a menu item. Press the ENTER button to cnfirm. Press the D.SETUP to exit the DVD setup menu. The factory default password is “0000”.
CUSTOMIZING THE DVD FUNCTION SETTINGS Press the D.SETUP button and then press the ◄/► t o display the language menu page when in DVD mode. Press the ▲/▼ b utton to move the highlight to select the following option. Press the ► b utton to enter the following menu and use the ▲/▼ b utton to select a menu item. Press the ENTER button to cnfirm. Press the D.SETUP to exit the DVD setup menu. Press the D.SETUP button and then press the ◄/► t o display the audio setup menu page when in DVD mode.
CUSTOMIZING THE DVD FUNCTION SETTINGS . Press the D.SETUP button and then press the ◄/► t o display the Digital setup menu page when in DVD mode. Press the ▲/▼ b utton to move the highlight to select the following option. Press the ► b utton to enter the following menu and use the ▲/▼ b utton to select a menu item. Press the ENTER button to cnfirm. Press the D.SETUP to exit the DVD setup menu.
DISPLAY MODE PC FORMATS Res o l ut io n 640 X 480 H or i z o nt a l Sc an ning F r eq u en cy (KHz) Vert i c a l Sc an n i n g Fr e qu e ncy (Hz) 31. 5 6 40 X 4 8 0 6 40 X 480 8 00 X 600 8 00 X 6 0 0 800 X 6 0 0 800 X 6 0 0 1 024 X 7 68 10 24 X 7 68 1 0 24 X 7 68 13 6 6 X 76 8 47. 7 NOTE: This product does not support the display mode not listed above. In order to achieve the best display effect, please select the above-listed 11 display modes input signal.
DISPLAY MODE VIDEO FORMATS SUPPORTED COMPONENT / HDMI INPUT MODE R e solut i on Horizontal Scanning Frequency Vertical Scanning Frequency (Hz) Format 720 X 480 31. 47 59. 94 480 i 720 X 480 15. 734 59. 94 480 p 1280 X 720 37. 5 50 720 p 1280 X 720 45 60 720 p 1920 X 1080 31.25 50 1080 i 1920 X 1080 33.75 60 1080 i 24 1080 p 1920 X 1080 27 1920 X 1080 56. 25 50 1080 p 1920 X 1080 67.
SPECIFICATION Model Description Panel Systems Panel Type Diagonal Size Screen Format Resolution Brightness Contrast View Angle Response Time Maximum Color Color System Sound System Audio System Sound Output LCD Panel 32 inches 16:9 1366 x 768 500nit 4500 : 1 178(H)/178(V) 5 ms 16.7M colors ATSC/QAM/NTSC M BTSC RF Input 75 ohm external terminal Video: 480i, 480p, 720p, 1080i, 1080p. Audio: Two channel linear PCM 32, 44.1 and 48kHz, 16, 20 and 24 bits D-sub 15pin G: 0.7Vp-p, 75ohms B: 0.
TROUBLESHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY ) No power. • Make sure the AC power cord is connected. • Turn on the unit. The remote does not function. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace the batteries in the remote with new ones. DVD No sound or only a very low-level sound is heard. • Make sure that you’ve selected DVD mode. • The system is in pause mode.
TROUBLESHOOTING GUIDE SYMPTOM TV Bad Picture (snow, multiple images distortion,blurry) No sound. CAUSE (AND REMEDY ) • • • • • Check the location of the antenna and adjust it if necessary. Make sure the antenna cable is firmly connected. Make sure all input cables are firmly connected. Increase the volume. Check whether the mute function has been activated on the Remote Control. Black and White picture. • Check the PICTURE setting within the PICTURE menu.
