Service manual


Programming
Error Message
With G3/Gold Cup Series brewers, there are three error messages that can appear on the screen to advise the user of a malfunction. If one of
these error messages appear, the brewer will lock up and stop functioning until the error is corrected.
An error message will occur under the following conditions:


minutes.

The screen may display a phone number to call for service. After the malfunction is corrected, the error message must be
cleared. To reset the control panel and return to normal operation, press  for 5 seconds.




Tank Temperature Check
Turn on brewer at the control panel ON/OFF button. Press and hold 


Beeper On/Off

Banner Name (Factory set to CURTIS)
Press  to display letters and change letters or < to move place and EX to exit when complete
This feature allows up to 14 letters to be programmed for company name or regional name. Programming all blanks
disables Banner Name. If programmed, Banner Name is displayed every 5 sec. on and off.
P-Maintenance (Factory set to OFF)
Press  to Select, Set gallons brewed to indicate P-Maintenance. Press < or > to adjust from Off to 3000 gallons.
Press  to exit.
Beeper On/Off (Factory set to ON)
Press  to display ON or OFF. Pressing either < or > toggles between on and off.  to set. When ON, this feature
allows you to hear a short beep each time a button is pressed.
Quality Timer (Factory set to OFF)
Press  to Select. By pressing < or > buttons, you can increase and decrease time. Setting range is from 0 to 10
hours in 1 hour increments. Press 
Display Brew Time (Factory set to ON)
Press  to Select. Pressing < or > toggles between ON and OFF.
Display Messages 
Press  to display ON or OFF. Pressing either < or > toggles between on and off. This feature allows the operator to

Model Select (Factory set to 1/Half Batch)
Press  to Select. Pressing < or > toggles between 1/Half Batch and 3-Batch.
Exit
Press  to select, exits program mode and returns unit to operation. Pressing > returns you to Tea Recipes.
Quality Timer
Display Brew
Time
Banner Name

