RCD224UK PORTABLE CD RADIO OPERATING INSTRUCTIONS Please read and follow this instruction manual carefully before using the unit and retain it for future reference
TABLE OF CONTENTS SAFETY INSTRUCTIONS .................................................... 2 FUNCTIONS AND CONTROLS ................................................. 4 POWER SOURCE ......................................................... 5 A. DC POWER OPERATION ...........................................................................................................................................5 B. AC OPERATION.............................................................................................
l SAFETY INSTRUCTIONS WARNING: IF CONNECTED TO AN AC OUTLET: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE IMPORTANT SAFETY INSTRUCTIONS SHALL INCLUDE, IF AND AS APPLICABLE TO THE APPLIANCE, STATEMENTS THAT CONVEY TO THE USER THE INFORMATION ITEMIZED IN THIS PARAGRAPH: 1. Read instructions All the safety and operating instructions should be read before the appliance is operated 2.
Follow the advice below for safe and appropriate operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE · As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. · Stop operation immediately if any liquid or solid object should fall into the cabinet. · Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. · Do not put anything in the safety slot.
FUNCTIONS AND CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. OPEN BUTTON PROG BUTTOM REPEAT BUTTON RANDOM BUTTON CD STOP BUTTON REW BUTTON F.FWD BUTTON PLAY / PAUSE BUTTON TELESCOPIC ANTENNA 10. TUNING KNOB 11. POWER ON/OFF BUTTON 12. AUX IN JACK 13. HEADPHONE JACK 14. DC 6V MAINS 15. POWER INDICATOR 16. CD TRACK DISPLAY 17. SPEAKER 18. HANDLE 19. FREQUENCY INDICATOR 20. FM STEREO INDICATOR 21. CD DOOR 22. VOLUME CONTROL 23. FUNCTION SELECTOR(AUX IN/CD/RADIO) 24. BAND SELECTOR(FMST/FM/AM) 25.
POWER SUPPLY This unit operates with 4 X SIZE “C’ (UM2) batteries or from AC120V/60Hz line adaptor externally( not included) A. DC POWER OPERATION 1. 2. 3. 4. Open the BATTERY CASE (#25) Insert 4 pcs Size “C” (UM2) batteries (not included) according to the polarity diagram on the back cabinet. Close theBATTERY CASE (#25). Turn the POWER ON/OFF (11#) to ON position, the POWER INDICATOR(#15) will be turned red IMPORTANT: Be sure that the batteries are installed correctly.
CD PROGRAMMED PLAY This function allows the tracks to be played in a programmed sequence. 1. Under CD stop or playing condition, press the PROG. BUTTON (#2). The CD TRACK DISPLAY (#16) will display “01” and the PROG on the display will flash. 2. Press the CD F.FWD BUTTON (#7) or CD REW BUTTON (#6) to select the song to be programmed. 3. Press the PROG. BUTTON(#2) again to store selection. The CD TRACK DISPLAY (#16) will advance to “02”. 4. Press the CD F.
TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart.