Digital Camcorder VR269 User Manual RoHS COMPLIANT
Introduction Congratulations on your purchase of this digital video camera. Before using the camera, please read this user manual carefully. With this digital video camera you can take both video clips and still photos. The illustrations in this user manual are to visually detail the operation of the digital video camera. Notice for use General: 1. Never open the housing of the digital video camera as some parts may cause an electrical shock. 2.
Maintenance and care: 1. To clean the lens, first blow away dust on its surface, then use cloth or tissue to wipe the lens. If necessary, use lens cleanser. 2. Avoid touching the lens with your fingers. 3. When left idle for long periods, remove the batteries from your digital video camera and store in a dry and dark place. Miscellaneous: 1. When switching video output between LCD display and video devices, be sure to exit from the ‘play’ or ‘record’ state. 2.
System requirements When operating and using this digital video camera, be sure the computer you are using meets some basic requirements. Doing so will allow you to operate the camera to its full functionality. Below are the requirements: Operation System CPU Memory Sound card and display card CD-ROM Hard Disk Other Microsoft Windows 98, 2000,XP, Vista, Windows 7 Above Intel PIII667 or CPU of equal performance Above 128 MB DirectX8 or above. 4× speed or above 1 GB space above useable One standard USB 1.
Getting to know your camera 1.
9.LCD panel 10.Set Key 11.Mode Key 12. Right Key 13. Confirm/OK key 14.UP key 15.Down key 16.Left key 1. Power Key 2. SD/MMC SDHC Card Slot 3.Microphone 4.Lens 5.Busy indicator 6.Speaker 7. USB Switch 8.USB Connector 2. Basic operation 2.1 Installing the battery Slide down the back cover and insert three new AAA alkaline batteries. Align with correct polarity of battery terminals. Close the back cover. 2.2 Using a SD/MMC/SDHC card Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the switch to the un-LOCK position to store recorded videos and still pictures. 2.3 Powering on/off In the power-off state, press and hold the power key to power on the camera. In the power-on state, press the power key to power off the camera. In the power-on state, let the camera idle for 1 minute（default）to power off the camera automatically.
Date and time setting Press the SET key to open the menu and then press the left and right key to enter setting menu. Press the down key to select “date and time” menu option and press OK key to enter setting window.
2.4 Change mode After power on, it will enter video record mode, press "Mode" key to change mode among video record, still camera and playback. 2.5 Video record Your camera will power on in the video record mode. To record a video press the Confirm/OK key to start video recording. Timing began to appear red words on the right top of the screen.The time While recording, press the Confirm/OK key again to stop recording.
In the video record mode，you can use the zoom feature by pressing the up or down key zooms in or out on the image before you record or while you are recording.While it is zooming, you can find the zoom rate on the bottom of the screen. 2.7 Still camera Press the Mode key to switch from video mode to still camera mode. In still camera mode, press Confirm/OK key to take a picture, by pressing the up or down key you can zoom in or out on the image.
2.8 Playback videos or photos Press the mode key to change modes, from video mode to still photo mode, to playback mode. Once in playback mode, press the ◄ key or ► key to select the desired file. When playing a video file press the Confirm/OK key to begin playing, press and hold the up or down key to increase or decrease the volume. Press the Confirm/OK key to pause and resume playing. Press the Mode key to stop playing the video.
2.9 Delete files In playback mode, press the Set key once to display “Delete File? (ALL/YES/NO)”, then press left or right key to select ALL, YES or NO, press the Confirm/OK key to confirm the action. 3. Connect to PC 3.1 Turn the camcorder on. Slide the USB switch up to extend the USB connector. 3.
4. Download files from the camera to PC 4.1 After connecting to a computer go to "My Computer” and open the "Removable Disk." The videos will be saved in the \DCIM\ 100MEDIA folder in the removable disk. Choose the desired video in the 100MEDIA folder and copy (drag with mouse) it into a folder of your choice in the computer. If using an SD card there will be 2 removable disks, one for the internal memory and the other for the SD card. 4.2 You can use ArcSoft Video Impression to edit videos. 4.
Application of Attached ArcSoft MediaImpression: 1. Introduction interface for software installation Put the CD attached into the CD-ROM of the computer, and then the following menu will appear: l If the CD driver does not automatically start, please double click the autorun.exe program under the root directory of the CD.
2. MediaImpression Installation and Use: Install MediaImpression: Click “Install MediaImpression” button and complete the installation as per the tips.
After installation, please restart the computer. Run MediaImpression : Double click the icon on the desktop or follow “Start → Programs” to open MediaImpression.
After starting MediaImpression, click “Import” to import the media.
Choose the video camera storage and choose the output location. Choose require file and click import. The selected file will be stored in the output location.
Click “Go to start page” to return to the main screen. Click “Video” or “All media” to use the “YouTube” function. Choose the file and click “Upload to YouTube”.
Enter your username and password to login to YouTube to execute your upload.
Product specifications: Image sensor Function mode Lens Digital Zoom Shutter LCD display Resolution White balance Exposure File format Video out Storage media USB port Dimension (LxWxH) 0.3 Mega Pixels Video Recorder, Still camera, Playback F2.8, f=3.8mm 4× Electronic 1.77 inch TFT Display Video: VGA (640x480) @30fps;QVGA(320x240)@30fps Still photo: default to 0.3M (640x480); interpolated to 1MP(1024x768) Automatic Automatic (Video)AVI, (Photo)JPG N/A SD/MMC/SDHC card(max.
