User's Manual

10
FADER
The fader control allows you to fade
the sound from the front pair of speak-
ers to the rear pair of speakers.
Adjustment range is 0-20 between
front and rear speakers.
Loudness
This function boosts bass and treble
according to the volume. You will know
this function is active when you see
“LOUD” on your display. This function
boost bass and treble for low listening
volume and should be turned off
at
higher volumes.
SUB ON/OFF
Turn the subwoofer RCA output ON to
activate this feature.
SUB VOL
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to increase or
decrease the volume level of the sub-
woofer outputs from 0-12.
SUB (55h / 85h / 120h / 160h
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to adjust the sub-
woofer
crossover point to 55HZ, 85HZ,
120HZ or 160HZ. Use the left knob for
adjustment.
BASS / MID / TREBLE X-Over This Menu does not come up when the EQ is set to
anything other than OFF.
BASS
Use this function to make a more
detailed boost or cut adjustment of
bass (low) frequencies as fol-
lows:60/80/100/120Hz.This is a very
useful mode for making very specific tonal adjustments. When selecting one of these
60/8
0/100/120Hz points, any changes to the prior BAS Menu settings on page 10 (-12 to
+12) will boost or cut at the selected frequency setting chosen in this menu.
TURN
PRESS
TURN
PRESS
TURN
PRESS
TURN PRESS
TURN PRESS
TURN
PRESS