Manual

Attaching the camera plate to the bracket
Attaching a camera to the camera plate
(MC) shoe mount
(For locking-ring
components)
3/8” x 16
tripod mount
HDV Extension Bar
(Locking shoe mount)
Camera mounting plate
(with 1/4” x 20 screw)
Attach the camera mounting plate to the bracket using the two screws (8-32 threads x 1/2” long socket
head) and Allen wrench (5/64”) supplied with your bracket. Install screws from underneath the bracket.
There are three different positions that the camera mounting plate can be placed in. The position of the
camera mounting plate will allow access for replacing the battery.
Attach your camera with lens positioned to the front of the bracket. Tighten the “D” style camera screw
completely. Best position is to position the screw in the middle of the slot.
HDV CAGE KIT INSTRUCTIONS
phone: [phone]
toll free: 800-530-2289
website: www.custombrackets.com
email: [e-mail]
32 Alpha Park
Cleveland, Ohio 44143
Made in USA
Innovative Camera Supports
HDV Extension Bar
(Locking shoe mount)
(MC) shoe mount
(For locking-ring
components)
Accessory hole
for HDV Grip Set
Front View
Accessory hole
for HDV Grip Set
Wire Keeper
(MC) shoe mount
(For locking-ring
components)
Wire Keeper
Attaching the MC shoe mounts to the bracket
Attaching the Extension Bars to the bracket
The kit includes (3) MCs (shoe mount for locking-ring components). Once nal location is determined,
tighten the MC down with the “D” style screw.
The kit includes (2) Extension Bars (extended locking shoe mounts). The location of these can be
installed in the slot on the top of the bracket. They can be positioned towards the front or back of
the bracket. This allows placement of any component in the perfect position while helping maintain a
disired balance of the setup. Once nal location is determined then, tighten the Extension Bar down
with the “D” style screw.
Attaching the bracket to a tripod or monopod
The HDV Cage includes a 3/8” x 20 threaded hole on the base. To attach to a tripod or monopod, place
the base on the 3/8” x 20 mounting stud and screw it into the base until it is rmly attached.