SDS

Conforms to OSHA HazCom 2012 Standard and WHMIS
SAFETY DATA SHEET
Section 6: ACCIDENTAL RELEASE MEASURES
6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES
Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
6.2 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP
Methods for Containment:
Contain and/or absorb spill with inert material (e.g. sand,
vermiculite), then place in a suitable container. Prevent entry into
sewage and waterways.
Methods for Cleaning-Up:
Rinse off with water, but do NOT let rinse water enter into sewage
and waterways. Dispose of unwanted material properly in
accordance with all local, regional, national and international
regulations.
Section 7: HANDLING AND STORAGE
7.1 PRECAUTIONS FOR SAFE HANDLING
Handling:
Use in well-ventilated areas. Wear chemical resistant gloves and
eye protection. Do not mix with other chemical products, except as
indicated by the manufacturers. Do not get in eyes. Do not get on
skin or clothing. Do not breathe fumes. Do not take internally.
General Hygiene Advice:
Use good industrial hygiene practices and wear recommended
personal protection.
7.2 CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Storage:
Keep out of the reach of children. Keep container tightly closed.
Store between +5°C and +35°C protected from frost and direct
sunlight. Keep containers closed when not in use
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 CONTROL PARAMETER
Exposure Guidelines
Not applicable
8.2 EXPOSURE CONTROLS
Engineering Controls:
Use general industrial hygiene practice
Page 4 of 10
Star Set 1000 Latex Additive Print Date: 11-Sep-14