MSDS

MATERIAL SAFETY DATA SHEET
Thin-Set Mortar Admix
February 11, 2013
3 / 6
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient
OSHA
-
PEL
ACGIH
-
TLV
Calcium chloride Not available. Not available.
Methyl alcohol 200 ppm 200 ppm
Engineering Controls:
Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection:
Wear eye/face protection.
Hand Protection:
Wear suitable gloves.
Skin and B
ody
P
rotection:
Wear suitable protective clothing.
Respiratory Protection:
In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations:
Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Opaque.
Colo
u
r:
White.
Odo
u
r:
Mild odour.
Odo
u
r Threshold:
Not available.
Physical State:
Liquid.
pH
:
9-10
Viscosity:
Not available.
Freezing Point
:
~ 0 °C (~ 32 °F)
Boiling Point
:
~ 100 °C (~ 212 °F)
Flash Point
:
Not available.
E
vaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Not available.
Specific G
ravity:
1
Solubility
in W
ater:
Miscible.
Coefficient of Water/Oil
Distribution:
Not available.
Auto
-
ignition Temperature:
Not available.
Percent Volatile,
wt. %:
85%
VOC content, wt. g/L
:
15 g/L