Installation Guide

AcrylPro®ProfessionalTileAdhesive/TDS127
1 Product Name
AcrylPro®ProfessionalTileAdhesive
2 Manufacturer
Custom Building Products
Technical Services 10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
AcrylPro®ProfessionalCeramicTileAdhesiveisaprofessional
formula adhesive with high bond strengths. Ideal for small format
ceramic, mosaic, porcelain and most gauged stone tile on walls or
floors, AcrylPro may be used in areas with intermittent water exposure
such as tub surrounds and shower walls. Recommended for tile up to
8" (20 cm) on any side. Can be used with tile up to 15" (38 cm) on any
side but dry time significantly increases. For tile with any side greater
than 15" (38.1 cm), CUSTOM recommends using a polymer modified
cement mortar specifically designed for setting large format tile. Call
Technical Services at 800-272-8786 for more information.
Key Features
For standard wall and floor tile installations
Just spread and set
Ideal for small format tile
Sets porcelain, ceramic and stone
Suitable Tile Types
Vitreous, semivitreous or nonvitreous tile: ceramic
impervious porcelain, mosaic, quarry tile, slate and natural stone.
Suitable Substrates
Concrete, mortar beds, masonry, Portland cement plaster
WonderBoard®Lite, cement backerboards
Exterior Grade Plywood (EGP) interior residential and light commercial
dry areas
Gypsum wallboard (interior dry areas)
Existing ceramic tile
Fully-bonded sheet vinyl flooring
Plastic laminates
Cutback adhesive (see preparation instructions)
Composition of Product
Proprietary blend of acrylic copolymers, calcium carbonate and
inorganic materials.
Benefits of Product in the Installation
High bond strengths for 8" x 8" (20.3 cm x 20.3 cm) floor tile
Meets ANSI A136.1, Type 1 requirements for intermittent water
exposure
Limitations to the Product
Recommended floor tile size: 8" (20 cm) or less on all sides.
If dry time is a concern due to tile size or other limitations noted, use a
traditional polymer modified thinset mortar instead.
Do not bond directly to hardwood, Luan plywood, particle board,
parquet, cushion or sponge-back vinyl flooring, metal, fiberglass,
plastic or OSB panels.
When setting moisture sensitive natural stone, cement or agglomerate
tile,checkwithCustomTechnicalServices;useEBMLite™Epoxy
BondingMortar100%SolidsorCEGLite™100%SolidsCommercial
Epoxy Grout.
When installing ceramic plank tile greater than 15" (38.1 cm) long, use
a cement mortar designed for large format tile.
Not recommended for installing tile larger than 6" x 6" (15.2 cm x 15.2
cm) over waterproofing membranes and vinyl flooring.
Donotusetoinstallresinbackedmarbleofstone;useEBMLite™
EpoxyBondingMortar100%SolidsorCEGLite™100%Solids
Commercial Epoxy Grout.
Recommended for interior use only. Do not use for steam rooms,
showerfloorsorunderwater.Forthoseinstallations,useCUSTOM®
Polymer-Modified Mortar Systems.
Not for use over radiant heat systems.
Installation dry time varies depending on tile size and density,
substrate porosity and ambient conditions.
Do not use to install fixtures, ungauged natural stone, gauged stone
thicker than 3/8" (9.5 mm), transparent glass tile, translucent stone,
Saltillo pavers or lug back tile on floors.
Packaging
1 qt (0.95 L) pail
1 gal (3.78 L) pail
3.5 gal (13.25 L) pail
Canada: 1 qt (0.95 L), 6.5 lb (2.9 kg) pail
Color: White
AcrylPro®ProfessionalTileAdhesive
Published Date: 3/28/2018