MSDS

2
MATERIAL SAFETY DATA SHEET
AcrylPro Ceramic Tile Adhesive
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient OSHA-PEL ACGIH-TLV
((10 mg/m
3
)/(%SiO
2
+2) TWA (resp));
((30 mg/m
3
)/(%SiO +2) TWA (total));
Silica, crystalline, quartz
((250)/(%SiO
2
+5) mppcf TWA (resp))
0.025 mg/m³
Ethylene glycol
Calcium carbonate
Not available.
15 mg/m³ (total); 5 mg/m³ (resp)
50 ppm
10 mg/m³
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: W ear eye/face protection.
Hand Protection: W ear suitable gloves.
Skin and Body Protection: W ear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Paste-like compound.
Color: Off-White.
Odor: Characteristic latex odor.
Odor Threshold: Not available.
Physical State: Paste.
pH: 8.5-9.5
Viscosity: Not available.
Freezing Point: ~ 0 ºC (~ 32ºF).
Boiling Point: Not available.
Flash Point: Not available.
Evaporation Rate: Not available.
Lower Flammability Limit: Not available.
Upper Flammability Limit: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Relative Density: 1.3 g/mL.
Solubility in Water: Partially miscible.
Coefficient of Water/Oil Distribution: Not available.
Auto-ignition Temperature: Not available.
Percent Volatile: ~ 35%.
3 / 7