TDS

Commercial 100% Silicone Sealant / TDS-100
1 Product Name
Commercial 100% Silicone Sealant
2 Manufacturer
Custom Building Products
Technical Services
10400 Pioneer Boulevard, Unit 3
Santa Fe Springs, CA 90670
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
Our Commercial 100% Silicone Sealant is permanently flexible and is
designed for use in coves, corners, changes in plane and expansion
joints associated with exterior or interiors applications of tile and
stone. Can be used in pools and other wet applications. Conforms to
ASTM C-920, Type S, Grade NS, Class 25, Use T, NT, A, I, M and G,
ASTM C1248 and ASTM C-794 properties. Meets or exceeds TCNA
EJ171 Movement Joint Guidelines for Ceramic, Glass & Stone. This
product was previously named Commercial 100% Silicone Caulk.
Key Features
Suitable for expansion joints, wet and submerged areas
Uses
Joints for ceramic tile and stone applications
Expansion joints in residential and commercial applications including
those in traffic areas
Exterior and interior use
Swimming pools and other wet area applications
Around tubs, showers and sinks
Composition of Product
100% silicone resins and fine fillers
Benefits of Product in the Installation
For use in coves, corners, changes in plane and expansion joints
Exterior and interior applications of tile and stone
Use in pools and other wet area applications
Conforms to ASTM C-920, ASTM C1248 and ASTM C-794 properties
Limitations to the Product
Joint depth should not exceed 1/2" (13 mm)
Joint width should not exceed 1" (2.5 cm)
100% Silicone passes non-staining testing per ASTM C920 and has
also passed ASTM C1248 with tested stones. Due to cleaners used
on site and other unknown factors, staining may occur. Please perform
test to replicate usage.
Packaging
10.1 oz (300 ml) cartridge
4 Technical Data
Applicable Standards
Meets the requirements of ASTM C-920, ASTM C1248 and TCNA EJ
171
Technical Chart
Tack Free Time (ASTM C-679) 15-20 minutes
Sag / Slump (ASTM C-639) < 3 mm
Shore A Hardness (ASTM C-661) 35
Service Temperature Range -60 to +300°F
Tensile Strength (ASTM D-412) 140 psi
Elongation (ASTM D-412) 350%
Joint Movement (ASTM C-719) +/- 25%
Environmental Consideration
Custom® Building Products is committed to environmental
responsibility in both products produced and in manufacturing
practices. Use of this product can contribute towards LEED® v3
certification:
Up to 2 points towards MR Credit 5, Regional Materials
Up to 1 point towards IEQ Credit 4.1, Low-Emitting Materials –
Adhesives & Sealants
5 Instructions
General Surface Prep
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when
handling product.
Commercial 100% Silicone Sealant
Published Date: 7/17/2020