MSDS

MATERIAL SAFETY DATA SHEET
PRODUCT NAME: LEVEL QUIK CONC. LATEX PRIMER HMIS CODES: H F R P
PRODUCT CODE: 3020 0 0 0
================== SECTION I - MANUFACTURER IDENTIFICATION =================
MANUFACTURER'S NAME: Custom Building Products, Inc.
ADDRESS: 6511 SALT LAKE AVE., BELL, CA. 90201
EMERGENCY PHONE: [phone] INFORMATION PHONE: [phone]
DATE REVISED : 07-24-98 NAME OF PREPARER : STEVE TAYLOR
========== SECTION II - INGREDIENTS/SARA III INFORMATION ==================
OCCUPATIONAL EXPOSURE VAPOR
LIMITS PRESSURE Wt.
COMPONENTS CAS NUMBER OSHA PEL ACGIH TLV mm Hg @ TEMP % -----
----------------------------------------------------------------------------
Water 7732-18-5 60-80
Acrylic Polymer N/A 20-40
* No toxic chemical(s) subject to the reporting requirements of
section 313 of Title III and of 40 CFR 372 are present. ***
============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS =============
BOILING RANGE: N/A SPECIFIC GRAVITY (H2O=1): 1.0
VAPOR DENSITY: HEAVIER THAN AIR EVAPORATION RATE: SLOWER THAN ETHER
SOLUBILITY IN WATER: EMULSION
APPEARANCE AND ODOR: MILKY WHITE LIQUID EMULSION
========== SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==================
FLASH POINT: N/A
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: N/A UPPER: N/A
EXTINGUISHING MEDIA: , WATER FOG
SPECIAL FIREFIGHTING PROCEDURES
NONE
UNUSUAL FIRE AND EXPLOSION HAZARDS
DRIED FILM IS COMBUSTIBLE SIMILAR TO WOOD. BURNING DRY RESINS EMITS
DENSE, BLACK SMOKE.