MSDS

MATERIAL SAFETY DATA SHEET
SimpleFix Ceramic Tile & Fixture Caulk
3 / 6
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines
Exposure Limits
Ingredient OSHA-PEL ACGIH-TLV
Benzyl butyl phthalate Not available. Not available.
Titanium dioxide 10 mg/m³ 10 mg/m³
Medium aliphatic solvent naphtha
(petroleum) C9-C12
100 ppm 100 ppm
Engineering Controls: Use ventilation adequate to keep exposures (airborne levels of dust,
fume, vapor, etc.) below recommended exposure limits.
Personal Protective Equipment:
Eye/Face Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
General Hygiene Considerations: Handle according to established industrial hygiene and
safety practices.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Viscous paste.
Color:
Clear/White.
Odour:
Acrylic.
Odour Threshold:
Not available.
Physical State:
Paste-like compound.
pH:
7.5-7.9
Viscosity:
Heavier than air.
Freezing Point:
Not available.
Boiling Point:
Not available.
Flash Point:
> 135°C (> 275°F)
Evaporation Rate:
Not available.
Lower Flammability Limit:
Not available.
Upper Flammability Limit:
Not available.
Vapor Pressure:
Not available.
Vapor Density:
Heavier than air.
Specific Gravity:
1.60-1.65
Solubility in Water:
Partial.
Coefficient of Water/Oil Distribution:
Not available.