Specification

TILING 09 30 00 Grout / TDS-242
1 Product Name
FusionPro®SingleComponent®Grout
2 Manufacturer
Custom Building Products
13001 Seal Beach Blvd.
Seal Beach, CA 90740-2757
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
FusionPro®isaprofessionalgradegroutthatfeaturesunsurpassed
stainresistancewithnosealingrequired.Itssinglecomponent®
formula is ready to use, color consistent and easy to spread and clean.
Fusion Pro can be used in commercial and residential environments,
interiors and exteriors, and on walls and floors. Its patent-pending
formulation can be used on all tiles and has built-in Microban
antimicrobial product protection.
Uses
Use to fill joint widths 1/16" to 1/2" (1.6-13 mm)
May be used for both floor and wall installations
Exterior and interior applications.
Commercial and residential applications
Countertops, tub surrounds, showers and high traffic areas
Suitable Tile Types
Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry,
cement body tile
Impervious porcelain and glass tile
Cement-based precast terrazzo
Polished, natural stone
Luxury Vinyl Tile
Composition of Product
Advanced polymers with inorganic fillers and pigments.
Benefits of Product in the Installation
Unsurpassed stain resistance
Easy to spread and clean
Ultimate color consistency
Additional Benefits
No sealing required
Ready to use
Hard, durable grout joints
No efflorescence
Crack resistant
MicroBan®antimicrobialproductprotection
Limitations to the Product
Should not be installed when ambient or surface temperature is lower
than50°F(10°C)orabove90°F(32°C).
Some ceramic, glass, marble or stone tiles can be scratched or
damaged by the silica aggregate filler. Perform a test on a small area
prior to use.
Tile or stone with high absorption, surfaces that are porous or rough,
textured surfaces and some types of porcelain tile may require sealing
prior to grouting to prevent possible staining. Use AquaMix®Grout
Release or TileLab®SurfaceGard®Sealer to prevent staining when
required.
Do not use Fusion Pro with irregularly shaped or spaced tile or stone,
such as pebble stones, where joint widths or depths exceed 1/2".
Not for use in either industrial applications or in areas subjected to
harsh or continuous chemicals, high heat or high-pressure cleaning.
For heavy industrial tile installations, use CEG-IG 100% Solids Epoxy
Grout.
Not for use over concrete slabs with high moisture emission rates.
Not for use in submerged applications (swimming pools, spas, water
features and fountains).
Packaging
Available in 1 gallon pails.
Available in 24 standard colors.
4 Technical Data
Approvals
Meets the performance criteria of A118.7 and A118.3.
FusionPro®SingleComponent®Grout
Published Date: 1/21/2014