Specification

TILING 09 30 00 Grout / TDS-176
1 Product Name
Polyblend®GroutRenew
2 Manufacturer
Custom Building Products
13001 Seal Beach Blvd.
Seal Beach, CA 90740-2757
Customer Support: 800-272-8786
Technical Services: 800-282-8786
Fax: [phone]
Email: [e-mail]
custombuildingproducts.com
3 Product Description
Polyblend®GroutRenewisawaterbased,acrylic,urethanestainand
sealer for renewing or changing the color of cement grout joints.
Formulated with fade-resistant pigments, Grout Renew seals the grout
againststainswhileitcolors.Availableinall48Polyblend®colorsto
complement any tile or stone installation.
Key Features
Makes grout joints look like new
Stain and fade resistant
Uses
Use to restore or change grout color of cement grout joints
Interior or exterior use
Composition of Product
Epoxy modified acrylic latex, fine fillers and colored pigments
Benefits of Product in the Installation
Renew or change the color of grout
Seals against stains
Available in all 48 Polyblend Grout colors
Limitations to the Product
Not recommended for use underwater.
Do not use solvent-based cleaners on recolored grout joints. We
recommendTileLab®Grout&TileCleaneroraAquaMix®Cleaner&
Resealer.
Unglazed tile will require sealing prior to coloring to ensure Grout
Renewisn'tabsorbedintothetile.WerecommendTileLab®
SurfaceGard®Sealer.
Donotapplywhenambienttemperatureisbelow50°F(10°C)or
above80°F(27°C).
Packaging
4 Instructions
General Surface Prep
Existing grout joints should be clean and free of all sealers and
contaminants which might inhibit bonding and absorption of colorant.
PrepareexistingjointsbycleaningwithTileLab®SulfamicAcid
Cleaner or Grout Haze Remover according to directions on the
container. Grout must be cured and dry prior to application. Test a
small inconspicuous area prior to application. Allow to dry 24 hours to
see if desired results are obtained.
Application of Product
Shake well before using. If more than one bottle of the same color is
being used, mix all bottles together in a separate container. Apply to
dry grout joints. Apply small bead of Grout Renew directly to center of
joint. Work back and forth with a soft-bristled toothbrush to assure a
thin, even application. Do not allow it to bead or puddle. Do not allow
Grout Renew to dry on tile surface, wipe it off as you go. Work small
areas at a time.
Drying Time
Ready for light traffic in 2 to 4 hours, normal traffic in 24 hours. Do not
expose to water for 72 hours. Avoid scrubbing joints.
Cleaning of equipment
Clean tools and hands with water before material dries.
Health Precautions
Do not take internally. Harmful if swallowed. If ingested, ingest liquids.
Do not induce vomiting. Avoid contact with eyes and prolonged contact
with skin. In case of eye contact, flush eyes with water for 15 minutes
and call a physician immediately. Keep out of reach of children.
Polyblend®GroutRenew
Published Date: 3/20/2014