Specification

ManualsBrandsCustom Building Products ManualsFlooringGlass Tile 7 lb. White Premium Thin-Set Mortar

Glass Tile Premium Thin-Set Mortar / TDS-200

1 Product Name

Glass Tile Premium Thin-Set Mortar

2 Manufacturer

Custom Building Products

Technical Services

10400 Pioneer Boulevard, Unit 3

Santa Fe Springs, CA 90670

Customer Support: 800-272-8786

Technical Services: 800-282-8786

Fax: 800- 200-7765

Email: contactus@cbpmail.net

custombuildingproducts.com

3 Product Description

With its unique blend of fine aggregate and premium white cement,

Glass Tile Premium Thin-Set Mortar offers the ultimate in bond

strength for the most demanding installation requirements for larger

format glass tile, glass tile mosaics and other difficult to bond tile and

stone. Glass Tile Premium Thin-Set Mortar is formulated to provide a

consistent bright white back drop for clear, iridescent and translucent

glass tile to accentuate its brilliance and beauty. The non-sag

propertiessupportverticalinstallationssotilewon’tslipandcontains

excellent handling characteristics. Exceeds ANSI A118.4TE, A118.15TE

and A118.11 without the need for additives.

Note:Pleaserefertotheglasstilemanufacturer’sinstallation

instructions. Glass Tile Premium Thin-Set Mortar bond strengths are

determined from direct contact with the glass tile. Glass tile is

manufactured using different processes and incorporating different

features including foils, paints, metal coatings and string mesh backing

or paper mesh backings. These differences may vary the actual bond

strengths of Glass Tile Premium Thin-Set Mortar to your specific glass

tile. Always refer to the glass tile manufacturer's installation

instructions.

Key Features

Consistent bright white color accentuates glass tile

High bond strength with minimal shrinkage

Sag and slip resistant - immediately holds wall tiles in place

Suitable Tile Types

Glass

Metal

Synthetic

Natural stone

Other hard-to-bond tiles

Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry,

cement

Impervious porcelain

Brick and mini-brick

Precast cement-based terrazzo

Suitable Substrates

Concrete, mortar beds, masonry, Portland cement plaster

WonderBoard® Lite cement backerboard

Liquid applied waterproofing membranes such

as RedGard® and Custom® 9240

Crack prevention sheet membranes such as Crack Buster® Pro

Uncoupling membranes such as SpiderWeb II

Surfaces treated with MBP Multi-Surface Bonding Primer

Exterior Grade Plywood (interior residential and light commercial dry

areas)

Gypsum wallboard (interior dry areas)

Existing ceramic tile (scarified)

Fully-bonded sheet vinyl flooring (scarified)

Plastic laminates (scarified)

Cutback adhesive (see preparation instructions)

Composition of Product

Modified dry mortar, which is a proprietary blend of Portland cement,

inorganic aggregates, copolymers and chemicals

Benefits of Product in the Installation

Maximum bond strength and flexibility

Color-consistent, bright white throughout the entire application

Superior bonding to plywood and to glass and porcelain tile

Excellent handling characteristics through extended open and

adjustment times

Approved for industry-recommended interior and exterior applications

Exceeds ANSI A118.4TE, A118.15TE and A118.11 standards without

the need for additives

Glass Tile Premium Thin-Set Mortar

Published Date: 7/6/2016

Summary of content (5 pages)

PAGE 1
Glass Tile Premium Thin-Set Mortar / TDS-200 Glass Tile Premium Thin-Set Mortar 1 Product Name Glass Tile Premium Thin-Set Mortar 2 Manufacturer Custom Building Products Technical Services 10400 Pioneer Boulevard, Unit 3 Santa Fe Springs, CA 90670 Customer Support: 800-272-8786 Technical Services: 800-282-8786 Fax: 800- 200-7765 Email: contactus@cbpmail.net custombuildingproducts.
PAGE 2
Glass Tile Premium Thin-Set Mortar / TDS-200 Glass Tile Premium Thin-Set Mortar Limitations to the Product Environmental Consideration Custom® Building Products is committed to environmental responsibility in both products produced and in manufacturing practices. Use of this product can contribute towards LEED® v3 certification: Do not bond directly to hardwood, Luan plywood, particle board, parquet, cushion or sponge-back vinyl flooring, metal, fiberglass, plastic or OSB panels.
PAGE 3
Glass Tile Premium Thin-Set Mortar / TDS-200 Glass Tile Premium Thin-Set Mortar All Lightweight cement or Gypsum surfaces should be primed with a properly applied sealer or a primer coat of RedGard, consisting of 1 part RedGard diluted with 4 parts clean, cool water. Mix in a clean bucket at low speed to obtain a lump free solution. The primer can be brushed, rolled or sprayed to achieve an even coat. Apply the primer coat to the floor at a rate of 300 sq. ft.l (7.5 sq. m/L).
PAGE 4
Glass Tile Premium Thin-Set Mortar / TDS-200 Glass Tile Premium Thin-Set Mortar 7 Product Warranty Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. Custom's® sole liability under this warranty shall be limited to the replacement of the product.
PAGE 5
Glass Tile Premium Thin-Set Mortar / TDS-200 Glass Tile Premium Thin-Set Mortar Coverage Glass Tile Premium Thin-Set Mortar - 25 lb. bag Trowel Size Min Coverage 1/4" x 1/4" x 1/4" (6 x 6 x 6 mm) Square-Notch 50 sq. ft. (4.6 M²) 55 sq. ft. (5.1 M²) Max Coverage 1/4" x 3/8" x 1/4" (6 x 9.5 x 6 mm) Square-Notch 35 sq. ft. (3.3 M²) 39 sq. ft. (3.6 M²) 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) Square-Notch 25 sq. ft. (2.3 M²) 28 sq. ft. (2.